Creative travelsound 250 speakers back button

if your computer came with a motherboard disc the sound drivers could be on it
click start control panel administrive tools computer management device manager scroll to sound,video and game controllers you might see a yellow question mark? Right click to reinstall drivers or uninstall
click start control panel sounds and audio,volume,advanced,speakers make sure you have selected the
(((appropriate speakers))) also audio you will find 3 drop down lists make sure you have the correct settings there
also
click start control panel sounds and audio devices you can adjust the volume there also select speaker volume you can change your settings there you can also tick in the box place icon in taskbar
if his does not fix the problem

have you tried this control panel sounds and audio,volume,advanced,speakers select the appropriate speakers from the drop down list or navigate to the device manager scroll to system devices + to expand,system speaker right click properties then select use this device (enable) also you might check
the speakers plug/outlet is usually at the back of the computer you will have to open up the computer to check the lead attached to the rear of the input plug make sure the connection is good
try cleaning your computer of dust using a fine air blower from a compressor making VERY sure that there is no MOISTURE in the air line specifically around the sound card and the CPU central processing unit dust causes static to build up in a computer
make sure you have an earth ******** before touching any parts inside your computer
hope this helps

1. Launched your Creative SoundBlaster Live program 2. In the main deck of the Surround Mixer, click the speaker button 3. In the speaker view, click the speaker selection button to select the 5.1 speaker mode if it is not selected
4. Reboot your computer

Yup, No easy way, just the right tool to make it easy. You need a long neck 'Plus' ( + ) type screwdriver also called Phillips type / star type screwdriver, to reach the screws deep inside the back of Creative CS-36 Speakers. But here are no serviceable parts in there, maybe a snipped wire is the most you can fix!

They are usually glued and screwed.
This is because they are intended to be replaced instead of serviced.

Therefore, a hammer is an excellent choice. A chisel may also be useful. Make sure you wear eye protection. ABS plastic is very stubborn.

I recommend www.newegg.com if you are in the market for computer parts and accessories.

You should open it and buy a new battery.

download from this link

http://www.creative.com/language.asp?sDestUrl=/support/downloads

or

http://support.creative.com/Products/Products.aspx?catid=1

if there's buzzing coming out, there's probably a rip in the actual speakers. Something is torn on the inside thus the weird buzzing noise.

Unless it was a zzzzzzzzz...... noise then there's probably some sort of interference. Possibly cellphone close by, or some other magnetic thing to create that annoying sound.

creative speakers not working.even though power button on the led not glowing. today morning properly worked but suddenly not working light not glowing. send me solution to my mail [email protected] tan q

The black/green/orange connectors go into the corresponding color ports in the back of the computer, but you computer have to be able to support 7.1 or at least 5.1 audio. If it can't you can buy a separate sound card from Creative that does.

Speakers need to be used much often.If they are left without using they might get affected with dust and charge storage.It happens with generally every brand.
The solution could be either servicing it or generally using it very regularly.