The projector I am working on seems to be dual badged. On the top and sides it says it's a Dukane ImagePro 8755D, but on the bottom it says it's a Hitachi CP-X250. Anyway, before I changed the lamp, the projector's fan would start to spin up then power down four times in succession, then the fan would stay on for about 8 seconds then go off. The Power indicator light now is steady red and the Temp indicator light is flashing red. I've changed the filter and the lamp only to find that I still have the same problem. The projector lamp never even starts to come on. Does anyone have any advise besides sending it back to Dukane for repair?
753 views
Usually answered in minutes!
Is the ballast in the lamp module or in the projector? Because I tried with a brand new lamp module.
×