Remote doesn't work rca model #F32648,i can't access the input function. The onscreen menu doesn't show it or I cannot find it. Problem is without it I can not use the DVD player.

Hello
If the remote control doesn't work, just buy one RCA RCR model universal remote control. Without remote control, you can't set the time to this set.

With the remote in TV mode, the input button on the remote should change the source (TV, AV1, etc. depending on the TV).

If the input button doesn't work, try a different code for your TV manufacturer. A code that controls the basic functions of the remote may not control the full set of functions of the TV. For some TVs, you can change the source from within the Menu. (It depends on the TV. I didn't notice if there was a Menu button that will open the TV menu on the RCA RCU600M.)

If none of the codes work, check if your TV has a Source or Input button on the unit. See if that button works.

If you have a different remote, please indicate the model.

I hope this helps.

Cindy Wells

If I'm Correct There Is Only One Set Of Inputs On That Model TV. What Inputs R U Reffering To?

is there a sub menu in the front panel of your t.v? if there, push the A/V button, to set in video mode

Unfortunately it looks like there is not a way.. go to radio shack and get the RCA 4 device remote model #RCR4383N $10.00. use the directions to program it automatically. just did my son's tonight, works like a charm. use the input button at the bottom to switch to and from AV input.

I can't really see it but is there a menu button on the front?maybe go threw the settings add channel and add video to the channels.

you able to select the input through the customer select menu by pressing the set up- or menu key on the tv itself, you can access your owners manual at the samsung website under SUPPORT and clicking downloads, bbut you will need a good model number, 488 does not show up in their records. You can get a universal remote that will pretty much do the basic functions, power, sound, channels and some universals will also work the menu, or click the partstore.com website and type in your brand name and model number, they will detail whatever is available for your particular tv.

That's a problem with universal remote controls. Often they don't control every function of the TV. They just don't have the buttons needed to control everything the original remote did. You'll have the most basic controls - power, channel and volume up and down - and maybe a menu button. But you'll frequently find other things don't work, like switching inputs. There isn't anything you can do except try all the codes for your TV brand and see what each button does. You might find that the buttons have different functions depending on which code you've entered. You might also look for another brand of universal remote that has more functions available.

That is the Digital range of channels, since it is digital you will not need a converter box for this model. Their is also an Analog range of channels which is the primary setting, You will need the factory remote to switch from Analog to Digital... Without that remote you might have a problem their isnt a way to switch within the menu settings, good luck!!!

On either the front of the TV or a universal remote (which I assume you have already programmed) hit the MENU button. Go to option 4 "Channel". Go down to "List and Labels." Hit the CH up or down key until you see "FRNT" come up under the channel # heading. If your DVD is connected and playing, you'll see it playing now. Exit the menu to watch. You'll have to reverse the process to get back to watching TV, but there doesn't seem to be any way around this if you don't have your RCA remote. This process is guaranteed to work on an F27442 and will probably work on some other RCA models.

Afraid only the original remote will fix this. All universals and aftermarket remotes will not have the function you need. try going here www.vancebaldwin.com and use there remote finder and see if they have the one you need