Turbo air tsf49sd - Turbo Air Freezers

Question edited for greater clarity.
Question moved from 'Power Computers' to Freezers.

Disconnect the mains power for 5 minutes to reset the control board. If that doesn't fix it, call for service.

If everything else is in proper working order, either a refrigerant level issue or and expansion device issue. If system constantly runs the previous, if not, possible temperature control. Look for system cycling or not cycling.

no they us a thermostat to operate temprature

The compressor runs during defrost to supply hot gas to the inside coil

Hi, Please set your thermostat a bit warm and observe the compressor. Also check your freezer for leaking.

Do you mean the MSF-23NM and the TSF-23SD? If so, you can find the information for them here:

http://www.turboairinc.com/TB-Products/Soliddoor.html

Basically, the difference between the two is that the MSF-23NM runs on more amps and is a new "maximum" series that Turbo Air came out with.

http://www.missionrs.com/MSF-23NM.html
http://www.missionrs.com/TSF-23SD.html

The product spec sheets at the two links above should be easy to download from our site. If you have any trouble, you can call us at 1(800)319-0690.

When the temp gets back down to running temp the vacuum will return if the gaskets are properly installed.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

there is a kit you can get we call it a sheppards hook got to a parts store and the can help

Call Rick at Restaurant Parts and More in Ohio. Give him the model and serial numbers and he can match what you need. FYI, most Turbo Air freezers are also Masterbilt. Turbo Air does the private lable thing for Master bilt.

Hope this helps.

Give Rick a call at Restaurant Parts and More. Turbo Air also makes Master-Bilt. Rick can probably get what you need. Just have the model and serial. He's good at this stuff. 1-888-814-1110.