Need to take old film out of camera

Hi,
try take 10 shot without any films insert to the camera.
If there is flash mean camera is working in goods condition.
It will appear black because someone had open the film cover before, therefore , it detect it's a new film box, and eject the first film cover.
film will appear black.

Solution: Replace with another film.
Cause: Many Polaroid film has batteries that power the motor and the battery may be weak or drained. Flip the film cartridge and check the voltage condition.

The battery built into the long-expired film has run flat. The only fix is to insert fresh film, Polaroid don't majke it any more, but The Impossible Project make compatible film with just 8 exposures instead of 10 per pack.

How old is the film in it?

Polaroid film packs have a battery included (a polarpulse powercell, I think).

If its an old film, the battery can go flat and as far as I'm aware there's no way to get power in to it.

I would take the cartridge out, (effectively not use the last shot), try a new cartridge to see if its working properly, then send the old cartridge back to Polaroid, if you think its faulty.

1 You have to push the button to take the picture 2 Some of the cameras are auto loading. In that case once you take the picture it will move the film automatically. 3 If it is not auto loading then you have to move the lever to load film for the next shot

The battery comes in the same package of the film, altough there's no new film been mada AT ALL. If you find one buy as much as you can. There's no battery and no where to put it besides with the film.

How old is the film in camera & when did you put in the film?

Polaroid's battery is built in with the film package.
If the package is old or been in the camera for a long time battery may be low or dead.

Try changing film out.

Good Luck! Hope this helped. Please rate.
MSG back if you need more help.

sounds like the door latch broke. (tape) Canon will only replace/upgrade not repair.
ours cracked after a drop then broke replacing the film.

The battery is in the film pack. The one600 doesn't use any other type of battery except what comes with the film.  Either the film is really old and the battery died or it's defective.  If the film is relatively new and you haven't been able shoot all 10 shots, then you might call the manufacturer for a replacement.  Otherwise, I'd buy a new film pack.