Need code for magnavox tv urc-4021boo
Hi, the codes you have requested;
Magnavox - 0054, 0706, 0030, 1454, 1254
Instructions to program code:
1. Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.
2. On the remote control,press a device key once (i.e., VCR/PVR, DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press VCR/PVR once.After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions. NOTE: To program control of a DVD Player,DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD once.After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions. NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SAT once.
3. Press and hold SET until the LED (red light) blinks twice,then release SET.
4. Use the Manufacturer's Codes (starting on page 18) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
the LED will blink twice. NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
5. Aim the remote control at the device and press POWER once.The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works.
i have a magnavox vcr/dvd combo there are no codes for any vcr/dvd combos but there is tv/vcr combo codes. WEIRD- but anyway, I tried the codes for just the vcr and just the dvd and even tried programming under the aux button, still nothing. I push program until the light comes on then I push vcr or dvd or aux (whichever I haven't already tried) and then the code and then enter, it blinks twice but thats as far as it goes. I would post a picture of the remote and the t.v. and the vcr/dvd if I knew where to upload it at.
My zenith remote
My zenith tv and magnavox vcr/dvd combo
thanks for trying
EXACTLY ! ! MY REMOTE WILL NOT ADJUST COLOR AND HALF THE MAGNAVOX VCR/TV BUTTONS PLUS I HAVE A REG SURROUND SOUND ZENITH WITH NO RESULTS ! SUCH A BIG WASTE OF MY HOURS AND TIME PLUS THEY WANT MONEY FOR HELP!! BBB IS BEING CALLED !! THANKS COLLEEN
I have a magnavox TV /DVD combo that I am trying to program with a Direct TV remote. NO LUCK
Thanks
I am having the same problem. I have a Direct TV Remote and have tried to set the remote control using the instructions from the Direct TV Menu. I go to setting for remotes and it give me the instructions and codes and it still will not set the remote for the TV function. I can change the Sat channels but it will not turn the TV on or Off and it will not let me turn the volumn up or down. I have had surgery and am having trouble getting in and out of bed and it is very frustrating when I change the channel and the volumn for different channels either goes too loud or too low and I either have to get out of bed or have one of my family members fix the TV volumn manualy. Can anyone help me?
Thank you CJ from Fresno,CA
Can not program philips Cl034 remote for Magnivox vcr/dvd combo
I have a Magnavox TV,DVD,VCR altogether. I was able to get it to turn off and on using the direct TV universal remote, but I cant get the volume to work. I need the code for the TV, so i can use only one remote. This is really aggravating!!!. Does anybody got a suggestion?
I can't get the correct codes for my directv I have talked to them I have a tv/dvd combo
×