Manual wheel on side of machine won't move needle

Sharon, I am not a sewing machine expert, but will post some links that may help you get your machine up and running. You can also google search your problem for a lot for info. on this issue. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
My Needle is Stuck My Hand Wheel Won Move HELP It Just Sewing
HOW TO FIX YOUR SEWING MACHINE IN 5 EASY STEPS
Help me diagnose and fix problem with my sewing machine

Jul 29, 2016 • Elna Sewing Machines

1helpful

1answer

How do I adjust timing on a Singer 20u33? I have the user manual, but that is not included.

THE HOOK IS UNDERNEATH THE PLATE. YOU WILL SEE IT SPIN AROUND OR ONLY A LITTLE OVER HALFWAY AND SPIN BACK TO BEGIN A NEW TIME. THE HOOK HAS TO MEET THE TOP OF THE NEEDLE HOLE AS THE NEEDLE IS RISING. (BENEATH THE PLATE.) WATCH THIS CAREFULLY WHILE ROTATING THE HAND WHEEL TOWARDS YOU. YOU WILL SEE THE NEEDLE AND THE HOOK MEET WHERE I SAID. IF THEY DON'T MEET AT THE RIGHT TIME THE THREAD FROM THE NEEDLE WON'T BE SNAGGED. TO CORRECT THIS YOU WILL HAVE TO LOOK IN THE BOTTOM PORTION OF THE MACHINE AND STUDY THE CRANKSHAFT FOR ADJUSTMENT HEX SCREWS. THIS CRANKSHAFT GOES TO THE HOOK. LOOSEN THE SCREWS AND MOVE THE HOOK SLIGHTLY TO MOVE THE HOOK UNTIL IT HAS BEEN TIMED WITH THE NEEDLE HOLE.

May 08, 2014 • Sewing Machines

3helpful

3answers

Sewing machine wheel won't turn, motor whirrs

So it sounds like the motor is working but nothing happens? And the hand wheel works ok by hand but nothing when the motor is engaged.

You've broken a belt. I'm not familiar with the 930, but if it has an internal motor... take it in to have it done. It's way too easy to knock these out of time. Spend the extra cash and have it cleaned lubed and adjusted too.

Sep 06, 2012 • Bernina Sewing Machines

0helpful

1answer

Needle won't go and down

Replace the needle.

Aug 11, 2012 • Elna 2007 Mechanical Sewing Machine

0helpful

1answer

I have a problem with the balance wheel . its moving but the other parts that are suppose to move with it won't its a real urgent matter

it sounds like the machine needs to be serviced

Mar 06, 2012 • Yamata FY811 Mechanical Sewing Machine

1helpful

1answer

I have a babylock 1556 and when I press the foot petal the belt turns, but it won't move the needle up and down. I took off the back so I could watch and see what was going on. I can see the belt...

On the side of the 'knob', look for another wheel that tightens against that, so it engages, that's what it sounds like. When that second wheel is loose, it won't run, it just spins. From the photo I can find of the unit, it looks like that second wheel is below it, but I can't be certain. Let me know how you make out. Please rate and comment, thank you,
Joe

Sep 04, 2011 • Baby Lock BL1556

0helpful

2answers

Needle won't move

I had that problem too! I usually turn the tension knob and it works,

Aug 07, 2008 • White Sewing 1632 Mechanical Sewing...

Question 2

Anonymous

Master 374 Answers
Posted on Apr 09, 2009

Anonymous

Master

Joined: Feb 28, 2009

Answers

374

Questions

0

Helped

183245

Points

1139

Hi there;
well try to rotate hand wheel center holder clockwise while hold grift the handwheel not to move to engage the clutch,because ther is clutch that holding the movement of the needle and the bobbins case.if still nothing change at all,open a cover motor assembly chech the belt tension if still engage on pulley,maybe slip pulley is occuring when motor run,if belt is slip to pulley replace belt,but if ok upon clutch adjustment ignore replacement.

regarding bobbin and threading you can watch on youtube.doing this,on internet explorer,type www.youtube.com
then on you tube search type"sewing machine"then click search
ther are high ligthed show for bobbins winding and treading just click it enjoy watching while you learn,have a nice viewing regards
don't forget to rate me,thank's

Related Topics:

Trustworthy Expert Solutions

Manual wheel on side of machine won't move needle

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Kenmore 1750 sewing machine's needle is not align it's more on the left side almost hitting the plate please how can I adjust the needle bar

I have a Brother PC-4000. When I press the foot pedal, I hear the motor spinning but the needle won’t go up and down and the material won’t pull through. Any suggestions?

I cannot raise the needle up or down.

Elna sewing machine is jammed or frozen needle does not go up or down

How do I adjust timing on a Singer 20u33? I have the user manual, but that is not included.

Sewing machine wheel won't turn, motor whirrs

Needle won't go and down

I have a problem with the balance wheel . its moving but the other parts that are suppose to move with it won't its a real urgent matter

I have a babylock 1556 and when I press the foot petal the belt turns, but it won't move the needle up and down. I took off the back so I could watch and see what was going on. I can see the belt...

Needle won't move

Not finding what you are looking for?

1418 Mechanical Sewing Machine

Kenmore 1750 sewing machine's needle is not align it's more on the left side almost hitting the plate please how can I adjust the needle bar

Ask a Question

Top White Sewing Sewing Machines Experts

Cindy Wells

ZJ Limited

Brad Brown

Are you a White Sewing Sewing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

1075_white-1418-x.pdf....

Www.singerco.com_uploads_download_1075...

Related Topics:

Trustworthy Expert Solutions

Manual wheel on side of machine won't move needle

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Kenmore 1750 sewing machine's needle is not align it's more on the left side almost hitting the plate please how can I adjust the needle bar

I have a Brother PC-4000. When I press the foot pedal, I hear the motor spinning but the needle won’t go up and down and the material won’t pull through. Any suggestions?

I cannot raise the needle up or down.

Elna sewing machine is jammed or frozen needle does not go up or down

How do I adjust timing on a Singer 20u33? I have the user manual, but that is not included.

Sewing machine wheel won't turn, motor whirrs

Needle won't go and down

I have a problem with the balance wheel . its moving but the other parts that are suppose to move with it won't its a real urgent matter

I have a babylock 1556 and when I press the foot petal the belt turns, but it won't move the needle up and down. I took off the back so I could watch and see what was going on. I can see the belt...

Needle won't move

Not finding what you are looking for?

1418 Mechanical Sewing Machine

Kenmore 1750 sewing machine's needle is not align it's more on the left side almost hitting the plate please how can I adjust the needle bar

Related Topics

Ask a Question

Popular Questions

Bobbin stuck on bobbin winder spindle

I have a 1409 Singer

How to oil my sewing machine

Can't pull thread from spool

WHITE Jeans Machine model 1475 thread tension problem

Top White Sewing Sewing Machines Experts

Cindy Wells

ZJ Limited

Brad Brown

Are you a White Sewing Sewing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

1075_white-1418-x.pdf....

Www.singerco.com_uploads_download_1075...