Can you repair a broken ipod connector on the JBL On Time?

Have you made sure the dock is compatible with the iPod version you have? If you are having to move the iPod around, this may be because the dock isn't built for the iPod you own.

It could also be a technical fault that the dock is loose. Take it/send it back to the shop and explain your problem.

You can pick up an ipod docking station adapter here.

If your looking for the dc charging adapter here you go. This is a good universal ipod dock adapter.

When you first got the speakers it should have came with a plastic insert that you put over the actual place you put the ipod on to charge. I know that you definetly need it for the movie playing ipods but not for the older ipods

only the THE JBL On Stage IIIP portable loudspeaker dock is compatible to iphone 3g, which is your version?

Buy a universal USB cord which has many different connecting ends. Easily available in electronic shops.
Connect USB 2.0 to the pendrive and the other end to JBL IPOD dock

I have the same problem, but I got round it instantly by plugging my ipod into the speaker via the headphone port on the ipod and into the audio port on the speaker. The speaker came with a spare lead as you can plug any music player into it this way. The sound quality seems exactly the same and I dont have to throw away the speakers, hooray! If you have lost the lead you need a 3.5 mm male to male headphone lead, just pence in any electrical shop or amazon!

hiya, i just had the same problem, where as my ipod dock connector didnt work, so i took it to the shop where i bought it and they said it wasnt repairable,, not taking this as an answer i went over to a mates house who is a lecky and asked him to repair it,,, we then come onto the snag of not being able to open it to get to the fault to solve this we got a bit mad at it and accidently dropped it on the floor :P where the 2 mesh panels came off showing over 20 new screws yes i said 20!!!! all that was holding the mesh was a lot!!!!! of glue..... after we took the many screws out we found out the reason why the shop said it wasnt repairable.... the manufacturer has put loads and loads of glue on everything stopping anyone from removing any of the connectors... we spent a good hour trying to remove the silly amount of glue but to no avail...
So if i was you i would bin it and get a new one...

this connector is available complete with pcb from jbl service center.But radial is very difficult to open.You need to open the mesh with a hair dryer,because it is heavely glued with hot glue on the borders.you will find screws inside.And also from the bottom & sides you have to remove this decorative strip.
it is very time consuming & headache.
i have myself replaced five of this docking sockets,it will take minimum of two to three hours to do this

No luck finding repair, so have accepted that mini jack into ipod and aux-in socket in on-time will have to do. My daughter is satisfied!!