Buffalo cloud station cs x 2 tb . blue light blinking non stop

Lets hope you did not damage it with a failed installation. (if it was firmware) If you just tried the install CD: Most of the time when you change the router (this wifi box....) you also change the IP range. If you set a fix IP on the storage what most people do you do not find it in the new network. The solution woud be a reset, or connect a PC with old IP range, change it to the new.
What do you see in the NAS NAvigator? Quote the device name pls.

check the lamp Please
any questions, feel free to contact me
have a nice day!
Jerry,Lampdeng Limited

http://sg.faq.buffalo-global.com/app/answers/detail/a_id/14913/p/31,33,6478,6480
The reset procedure for yours is partway down the page under LS-XL. Sorry I couldn't give you a direct link, but they used javascript instead of HTML anchors on the page.

You should try mounting the hard disk internally since any external HDD is actually a normal HDD in a SATA to USB enclosure. If that doesn't work , you should try finding recovery experts in your area but that might be expensive!

My ministation was doing the same, beeping and flashing green light after a light drop on the floor. Soo... I took my ministation usb drive out of the plastic enclosure and smacked it on the table a few times. Plugged it in and it spun back up!! Now my computer recognizes it and everythings working smooth! I assume something with the drive became jammed and the couple smacks loosened the drive head.. Anyway, if all else fails... beat it!

Are you able to plug it in via ethernet?

Unfortunately, this indicates a technical fault with the TV which can only be fixed by a service engineer.
If the light is blue and blinks 3 times, it is indicating a fault with one (or both) of 2 circuit boards inside. They are the XSUS or YSUS boards and will possibly need replacing.
At least knowing this might help you ascertain a quote as too how much the repair will cost.

The Xbox 360 can only recognize drives up to 16GB as noted on their website, I myself have tried a 32GB flash drive to test the limitations and it was not recognized. At this time it seems as though microsoft is limiting their external storage to 16GB.
http://support.xbox.com/en-us/Pages/xbox-360/how-to/usb-flash-drive.aspx

The following are for TB-20EL model. But it works in general for plantronics as well. For step 3 make sure your headset is in pairing mode. When you hold the button 6-8 sec, it should turn either solid blue or blink.
for tb-20el:
1. ensure that your phone's bluetooth feature is on
2.Ensure that the headset is off(press and hold button on your headset (called multifuntcion button) for 2-4 sec, teh indicator light will flash red)
3. press and hold the multifunction button for 6-8 seconds until the indicator light alternately flashes blue and red
4. set your phone to find new device
5. Ente rpin '0000' (four zero) then press OK or yes
6. this should complete the pairing.

Click on the Start Button and right click on Computer and select Manage; expand the Storage section and select Disk Management; click your external hard disk, right click on it and select format; when you will be asked what file system you want to be used select the default option - NTFS; Apply, OK.