Me aparece el error 99, sigo instrucciones y se repite
SOURCE: EOS Utility does not recoganize Canon Rebel Xti
I believe there are 2 modes of usb transfer that you can pick in the camera. They are set somewhere in the menu in the options. If you go through the menus thoroughly you'll find it. One option is for connecting the camera directly to a printer and the other is for computer transfer (there might also be an Auto setting but I don't remember for sure). Make sure that setting is set for computer transfer. If that doesn't fix your problem, re-install or update EOS Utility / ZoomBrowser.
SOURCE: Canon EOS Digital Rebel XTI
Normally it can be an assortment of things:
Dirty contacts between lens and mount causing a glitch in the communication.
Use of outdated or obsolete chipsets on certain lenses
Jam in the motor
I/O error on the cf card
Mechanical failure
Most of the time its a bad contact with the lens and the mount. Try cleaning it with a q-tip to wipe residue off the metal contacts.
Hope that helps.........
SOURCE: canon rebel xti digital camera
Error 99 is shutter error. Best solution is to replace it ASAP if the camera is still under warranty. We go through many replacement of shutters for many Digital Rebel series. There is no simple answer without replacing it to good shutter part. The problem will keep coming back. Out of warranty repair charges may run from $150 to $250 depending repair facility. -James. For further assistance by email, go to www.camerarepair.com
SOURCE: my canon eos rebel xti keeps showing error code 99
To isolate the cause of the issue, we suggest that you do the
following:
1. Turn off the camera.
2. Remove the lens, battery, and CF card.
3. Allow the camera to sit without power for approximately 20 minutes.
4. Insert a fully charged battery, and turn on the camera.
Does the "ERR 99" message appear? If it does, then the camera should
be serviced. If it does not, then please proceed to the next set of
steps:
1. Turn off the camera.
2. Insert the CF card.
3. Turn on the camera.
4. Format the CF card in the camera.
Does the "ERR 99" message appear? If so, then the CF card is the most
likely source of the issue. Try using a different card.
If the message does not appear, please complete the following steps:
1. Turn off the camera.
2. Clean the lens contacts by gently rubbing them with a pencil eraser
or soft cloth. Be careful that you do not let any debris fall into the
camera body.
3. Reattach your lens.
4. Turn on the camera.
If the "ERR 99" message only appears when one particular lens is
attached, then that lens should be examined by a service technician.
If you see the "ERR 99" with a different Canon lens attached, then the
camera should be serviced.
SOURCE: Canon Rebel XTi not recognized when plugged into usb
Vista is your problem. Solution...buy an inexpensive card reader to download your pics to a folder you create on your desktop. From there, you can send the pics to your photo editing software.
56 views
Usually answered in minutes!
×