Hp photosmart R727 reset problem

Hello,
Normaly the repair service reset camera by using special file on the SD card.This file is impossible to find it on the internet.But you can try to update FW maybe it will help to this error message.You can try download lates FW for R727 from google.(Last FW version is 3.02.15).
Then extract exe file and copy FW file to the SD card.Put SD card into the camera and close battery door.Hold Shutter button and power on camera.After FW update is complete just power off camera.Then try it again to swith on.If it will not help the only way is send camera into the repair service.

Best Regards
AIOS

Two ways: 1. Go into the menu and find "reset"...follow the on-screen instructions. 2..Remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on.

Remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on.

With the battery in, use a small paperclip and stick it in the hole next to the battery compartment. This is a reset button. If that does not work, close the battery cover and give a good medium smack against your leg. I know that sounds crazy but it works about 9 times out of ten with the HP cameras.

how do i restart my hp camera?

Try holding in the reset button longer then the recommended 6 seconds.
I've fixed many of these Photosmart series this way.

Dagra

Try a safety pin in the reset hole by the battery compartment most paper clips seem to be much to big. Also hold the reset for at least 3 seconds. The first time I tried I just pushed it down quickly and it did not reset. I just fixed my mom's camera with the exact same error. So safety pin and hold 3 seconds. For a diagram of the reset hole see web site mentioned in jimg's suggestion
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00743921&lc=en&cc=us&dlc=en&product=1154651

Hope this helps

Smack it a couple times, gently. You have nothing to lose, AND, I swear it works!!!

it wont open when power is turn on,i keep getting ,(camera has experienced an error)(please reset your camera)this number accompanies the message-00000018-4489-957-000,ive read the manuel nowhere does it say how to reset, help ?

Just gently smack it a couple of times. I swear, it soounds strange but it works!!