Mobilty scooter fault

Question edited for clarity, it is a TGA not a CGA.

Help in the link.

https://www.google.com/search?q=TGA+Mystere+mobility+scooter+error+7

Within mobility scooters, error codes tend to be shared

Error 7. Speed Pot Fault.
The throttle, speed limit pot, SRW or their associated wiring may be faulty. ? Check the throttle and speed pot and associated connections and wiring.

..

Question edited for clarity and toss in some CAPS.
Question moved from Cars and Trucks to a Mobility Category.

Maintenance manual Page 20 says

3 Front light doesn't work - Front LED board faulty - Replace front LED board.

But check the wiring connections to it and at the switch.

https://wheel.gr/wp-content/uploads/%CE%91%CE%BC%CE%B1%CE%BE%CE%AF%CE%B4%CE%B9%CE%B1/%CE%97%CE%BB%CE%B5%CE%BA%CF%84%CF%81%CE%BF%CE%BA%CE%AF%CE%BD%CE%B7%CF%84%CE%B1/scooters/afiscooter-BREEZE-S3-S4/S4/Breeze-S-Maintenance-Manual-version-14-12-2011.pdf



..

Question edited for clarity.
Question moved from Cars and Trucks.

Check all the connectors.

https://www.google.com/search?q=tga+breeze+s4+no+lights

..

Question edited for clarity.

In any electronics, and any battery, charging reverse polarity will damage the battery or components. Always Positive (red) to + , and Negative (black) to -

Page 8 of the manual.

BREEZE S

TGA Mobility https://www.tgamobility.co.uk > uploads > instr...

Charging the battery is the only maintenance required (refer to charging instructions). DO NOT leave the batteries flat, charge every 4 weeks if the Breeze is.

..

https://www.youtube.com/watch?v=UAEcl2fmKLM

This site may give you an idea on where to look.

TGA Spares TGA Scooters Mobility Scooter Parts Parts Spares

Find the buzzer and disconnect wires from there, or cut one or both of the wires at the buzzer and tape the connection to prevent shorting.

I've never had much luck getting information like this for most joysticks, and have never gotten it for Penny+Giles stuff. You may have the best luck looking for a used replacement joystick on eBay or Craig's List.

Hi Dont know about Error 02, byt if scooter is less than 1 year old get the people you got it from to fix it under warranty,

This problem may depend on which main controller your chair has fitted. It should be a Penny & Giles GC controller. US versions should have a GC3 whilst here in the UK, it would be fitted with a GC2. However, the diagnostic flash codes for these two controllers should be the same. The reason im slightly confused is that you say 5 flashes mean your charger is connected at power up, when in fact it should be a Right Motor Wiring Fault. 9 flashes is indeed a Solenoid Brake Fault, or in other words, the wheelchair is in 'Free Wheel' as you have described. Therefore, IF your controller is in fact a Penny & Giles GC, 7 flashes would mean a Joystick fault. There is not much you can do to diagnose this other than checking connections between the Joystick and main controller. If these are OK, it is likely that a new Joystick controller will be required as having these fixed is usually not cost affective. Hope this is of some help to you.