Display 11 I think there was a temporary power outage due to a thunderstorm. Upon returning home, the oven display was blank, not lit at all. When I pressed each of the buttons, none of them responded except for the oven light. But when I pressed the "secure-cancel" button, "11" appeared on the display. "11" remains on the display no matter what buttons are pressed. Turning off the circuit breaker results in a blank display screen again. Repeating the process, "11" comes up on the display after pressing the "secure-cancel" button. What is the problem and how can it be fixed?

I have not checked to see if the controls or display is shorted yet. My base question is still what does the display "11" actually signify according to Dacor. If the Dacor sofware is programmed to show "11", there must be a Dacor definition on the significance of this display. A supposition of what is "must" be does not answer the basic question. I have not checked to see if the controls or display is shorted yet. My base question is still what does the display "11" actually signify according to Dacor. If the Dacor sofware is programmed to show "11", there must be a Dacor definition on the significance of this display. A supposition of what is "must" be does not answer the basic question.

Sorry for the misunderstanding. I already knew about the F0-F8 Dacor codes from the owner's manual and the Internet. There were (2) topics in this FixYa page header mentioning "display or error 11" with no answers. That is why a posted another one. Display "11" has apparently appeared on other Dacor ovens and is not a totally a random display. As an engineer by profession, I was asking for a confirmation that display "11" has been accurately identified and what was involved in an actual repair to resolve the issue. Do you have documentation that a fried circuit board has resolved an incident of display "11"? What component part numbers do I need to order to fix the incident? This type of information is what I consider helpful. Sorry for the misunderstanding. I already knew about the F0-F8 Dacor codes from the owner's manual and the Internet. There were (2) topics in this FixYa page header mentioning "display or error 11" with no answers. That is why a posted another one. Display "11" has apparently appeared on other Dacor ovens and is not a totally a random display. As an engineer by profession, I was asking for a confirmation that display "11" has been accurately identified and what was involved in an actual repair to resolve the issue. Do you have documentation that a fried circuit board has resolved an incident of display "11"? What component part numbers do I need to order to fix the incident? This type of information is what I consider helpful.