- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your motherboard supports only ddr-1 ram modules. This means you can use: pc2100 (266), pc2700(333), pc3200 (400) Mhz modules. Do not mix thease types, it will couse system instability
8short
Display memory read/write error
The system video adapter is missing or defective
1 if it is an AGP card could be the slot for it is defective
2 Disable the onboard video chip in the bios try it again
3 If you have an old PCI videocard try that
4 if ou have 2 slots of ram chips try without one in then take it out and try the other
If its a P4mmv2 motherboard with AMIBIOS 686 and a VIA VT8233 chipset then the jumper setting are printed on the motherboard, but they have labeled the power switch wrong, I believe th reset switch is the power switch. This is the type of mother board that I have and I have learned this from experience. Also I read in somewhere on the internet about the problems with these types of motherboards.
Download ( Win95, Win98, Win98SE, WinME, WinNT4, Win2000, WinXP)
The file is small and has the name 160a.zip
×