T6534 RECOVERY DISC

IF you have a Recovery Partition, you can do a Factory Recovery, returning the Laptop to the day it came out of the box. Take a look at the eMachine website for info on a Factory Recovery from recovery partition: http://emachines-us.custhelp.com/app/answers/detail/a_id/29934

Some computers will have a recovery partition you can recover from it will prompt you as the computer is booting. Emachines are very low end computers and don't typically have a recovery partition. If you didn't create the recovery disc you will need to order it from Gateway's website as they own emachine.You can order recovery media from https://secure.tx.acer.com/RCDB/Main.aspx?brand=emachines

yes windows xp potable CD will solve it but select boot from CD ROM rather boot from floppy disk or you can use windows xp on bootable flash memory or you can restore your windows it might work

From the information provided, I understand that you are not able to create Recovery Disc from Recovery Center. You can launch Recovery Center by using F10 key. For this, restart the Computer keep pressing the F10 keey when the VAIO logo appears. If you are still not able to enter into the Recovery center, it is required to purchase Recovery disc from Sony.
Please go to the link below for purchasing recovery disc from Sony.
Recovery disc for VGN-AR/CR series
Hope this information will help you, do vote and replay..:)

Recovery disks cost about £15, check what version of windows you have, you may be able to download that version of windows from a torrent site and use your own COA key to activate it.

If the hard drive on your computer crashed what will be your next step here is to reinstall back to your computer including the operating system, but you can also try doing a system recovery if you have a recovery disc and run it and there you will see a option to do a recovery on your system. But if you also have a recovery disc for it you can also use that in recovering the computer.

As the computer is only 2 months old, you should be able to contact Emachines and have
them send you a recovery disc out for the particular model. As the computer may seem identical, in most cases a recovery disc from your computer will not work because of a different
driver or some other small issue.

If you bought the computer new and did not receive a recovery disc with it then the recovery software can be reinstalled from a hidden drive built into the computer.
The steps for re-installation:

• Restart the computer
• When the eMachines logo appears on the screen, press the Alt and F10 keys repeatedly.
• When prompted with a boot screen, hit the Enter key.
• After the system recovery program has loaded, follow the prompts to reinstall the operating system.

If you bought the computer used try the above method. If that fails then it came with a recovery disc but you didn't get it with the computer. The only thing you can do is contact eMachines support for help or purchase a new copy of Windows and reinstall it with that.
I hope this helps. If not and you need any help with reinstalling a new version of windows please let me know.

Hello jmackfreebal,
If the PC did not come with the Vista install disc or Recovery disc's, more than likely you can contact eMachine Customer Support about purchasing the Recovery Discs. Or maybe ask the store where you bought it if they can help. The worst case scenario is that you have to buy your own personnal copy of Vista. I know that all of this sounds bad, but without the discs there really isn't much that can be done.

just go to www.newegg.com and purchase an OEM copy of Windows XP for 99 bucks. thats your best bet. Or you may have a recovery partition on that desktop...if you press f11 when you turn it on it may let you recover from that. good luck