Belling XOU174 Electric Single Oven Logo
Posted on Mar 23, 2009

How do I find the model number on belling synergie oven?

The element has broken but I can't order another without the model number. We've lost the instructions and the sticker that usually shows this info on the inside of the door has worn off. The only writing on the actual oven is -SYNERGIE-. Any ideas?

  • Anonymous Apr 22, 2009

    I have similar oven, but double called Synergie Multifunction. Number label obscured because we haven't cleaned it enough! Lost the manual but now need to know what I'm allowed to use to clean it -- inside. Remember something about delicate oven walls, or was it the back, or the top? Oven works well enough after 5 years.

×

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Mar 28, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Mar 28, 2009
Answers
1
Questions
0
Helped
3021
Points
1

I have the same problem. I have inherited a Belling Synergie multifunction double oven. The Model No is worn out - yet there is a specification 492SS which isn't. I am going to purchase the element with this number and hope this works.

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Oct 19, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Oct 19, 2012
Answers
1
Questions
0
Helped
3021
Points
2

There is a exhaust tube from oven to top fan should there be one from the grill

  • Anonymous Oct 19, 2012

    there is a exhaust tube from oven to top fan should there be one from the grill

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

My Belling Synergie 482BL grill blew out yesterday

It's hard to say without actually seeing it, was it shorting out on the bracket that was supporting it? If so, this would be a weak point on the element and as it broke down it could have shorted out to earth through the bracket causing the bang/flash and tripping the breaker. If an element is just touching another metal part it won't short out because the filament is insulated from the casing. You should be able to find the element code on the casing near the terminals. Hope this helps.
Nov 11, 2013 • Ovens
0helpful
1answer

Replaced element on belling synergie on 2 occasions in the past 6 months. What could be the reason for them blowing?

fan on in oven but not heating up just after the power tripped think because of oven this is not the first time this has happened can you help please


yours shane
1helpful
1answer

Belling synergie element not working

Hi the bake part in the top oven of my synergie, and how do i get it out? thanks.
6helpful
2answers

How do I remove the oven element on our Belling Synergie XOU252? I have located it no problem but cant work out how to remove? Is it held in place with 2 very very small bolts?

It all depends on whether the scew heads are flat, or have slots for a screwdriver.
If no slots , then you are going to have to access the heater from the rear of the outer rear cover of the oven.
If the screws can be undone from inside, then simply unscrew them, and pull the element out towards you.
Hope this helps.
0helpful
1answer

Belling synergie oven grill comes on oven fan comes on all lights are working but no heat in the oven temp 200 setting on the oven symbol all plugs have been checked.

I suspect tha the oven element is faulty.
To access it, you will find it located at the rear of the oven compartment behind a removeable cover.
Hope this helps you.
2helpful
3answers

Belling XOU 252 Oven suddenly stopped working

Yes ,I would say that without doubt the element has gone
Elements can go without any warning at all.
0helpful
1answer

Faulty Oven

Have you tried www.appliance-parts.co.uk, they have a useful parts finder service.
Nov 30, 2008 • Ovens
15helpful
3answers

Belling synergie. oven does not heat up. grill ok. think i need to set to manual but how???

if its flashing auto.
Press and hold the 2 buttons on the left hand - clock and cook time and then press the + button.
This then sets the time to allow manual and takes the auto off.

cheers

will
1helpful
2answers

Belling Synergie

NEED NEW FAN OVEN ELEMENT THAT CAN BE FOUND HERE
You need Element code AB20 on link below
http://cookerandovenelement.co.uk/bellingfanovenelement.html

element is located on back wall of oven you need to pull oven oven to remove the element element is held by two nuts from back and i screw from front
6helpful
2answers

Belling Synergie fan oven.

the elemet has burned out round the fan
Not finding what you are looking for?

3,031 views

Ask a Question

Usually answered in minutes!

Top Belling Ovens Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66931 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39381 Answers

David Spradling
David Spradling

Level 3 Expert

13522 Answers

Are you a Belling Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...