Brother DCP 330C

"Unable to Print 5A" - Brother

https://help.brother-usa.com > answers > detail > a_id
The message "Unable to Print 5A" will appear on the display for one of the following reasons: i. A foreign object, such as a paper clip or ripped piece of ...

• 
  

  "Unable to Clean 5A" - Brother

  https://help.brother-usa.com > answers > detail > a_id
  The message "Unable to Clean 5A" will appear on the display for one of the following reasons: i. A foreign object, such as a paper clip or ripped piece of paper ...
  
  ..

Brother printer Error Unable to print 5A paper jam repair no ...

https://www.youtube.com > watch
PREVIEW
2:56 brother #Brotherprintererror #Brother5Aerrorthank you so much for watching please like,share and subcribe my channelYOU GET ERROR LIKE THESE ...
YouTube · Shivam Sharma Repairs · Jul 15, 2020

How To Fix Brother Printer Error 5a

https://printererrorcode.com > Brother Printer

Brother DCP-330C paper jam

looks like something is blocking paper feeder, roller or the caret. check for some unwanted parts of paper or paper clips.

I developed the same problem "unable to clean 46" on my brother dcp -330c printer.. after taking to a maintenance guy... he told me to remove my ink absorption pads and wash them out with water and leave to dry then once dry replace back in..

try changing the cartrage... may be it is empty...
or if it is full then try to clean its head with a tissue paper ...

Disconnect power for 5 minutes then power up to reset printer, make sure cartridge is secured properly. If it still happens, see my related solution on Error code #46.

sincerely
rover620

I have a brother MFC 3240C. My Black ink stopped printing(initially printed horizontal faded lines and gradually got worse), the other colors were printing fine. I tried cleaning numerous time( 50 -100 times over 1-2 weeks ). Still no improvement. The way I print now is:
1. I go to Printer Properties
2. Change Media type from "Plain Paper" to "Inkjet Paper".
3. Change Quality to "Photo".

This takes a long time to print 1-2 minutes per page. However, this works for me since this is my Home printer and use it for printing only few pages here are there.

Good Luck
RK

Hello Phillip_hell !!

Thank you for writing to fixya.com.

Here's a Knowledge Base article on the Brother's website for this problem. Just follow the instructions carefully & I am sure enough you'll not be disappointed. Here's the link:

http://welcome.solutions.brother.com/BSC/public/us/us/en/faq/faq/000000/002400/000090/faq002490_000.html?reg=us&c=us&lang=en&prod=dcp330c_all

This article explains step by step to fix this issue.

Hope this would be helpful & remember to mark the thread if you find this helpful.

Warm Regard's
Anurag Shukla

Usually there is more than one cartridge empty when you receive this kind of problem. Try opening the top cover and check if the display changes - it should change to specify one (or more) of the color cartridges as empty. That one(s) should be changed too.

simple driver configuration problem linux is (the Cups printing system) is pretty universal just get your settings right or even cr even surrogate settings it should work