INDUCTION STOVE all type of error code e solution

Very specialised high tech tops need engineers to fix. It is likely to be the power board.

https://www.google.com/search?q=Schott+Ceran+stove+top+with+5+induction+hobs+no+power

..

• Error code E13 error showing on display
• What causes an E13, E 13 error code on the Induction Cooktop control panel?
• Error code 13 on Induction Cooktop control panel

Cause:

• Universal OFF key failure

Troubleshooting:

1. If the controls are wet or water made contact with them, dry off the controls.
2. Turn off then back on to reset.
3. If the error persists, reset the unit at the circuit breaker.
4. Turn the unit back on to see if the error code cleared.

Rohit, this is a generic fault code for induction cook tops, I am assuming this is the same for your Prestige unit.

1. For error code E9 or E09 on an Induction Cooktop, disconnect power for 10 seconds.
2. Turn back on again then retest the unit operation.

If these steps do not resolve the issue, you will need to contact an authorized service shop.

Tthis is a generic fault code for induction cook tops, I am assuming this is the same for your Prestige unit.

1. For error code E9 or E09 on an Induction Cooktop, disconnect power for 10 seconds.
2. Turn back on again then retest the unit operation.

If these steps do not resolve the issue, you will need to contact an authorized service shop.

Did u ever find out.mine is doing the same.ive searched everywhere and can't find an answer

Error code: 8888 on my new induction stove please what is the solution.

Hello - Typically error code E on Electrolux induction cook top indicates an error with the user interface board/control board. Contact a professional to move forward accurately and properly diagnose/repair the unit.

E5 or E0 means that the stove is getting overheated. You have to reduce the temperature for it to stop. It goes on with few beeps and then stops.

Generally there is a number after the F. It sounds like some liquid got into the electrical, sometimes if you wait about a week for it to dry it will work. If not, you would need to call a service tech

always unplug electricity before attempting to repair on any electrical appliance

hi i could not find this model in the uk european models but i do no that e90 codes usually relate to configuration problems possibly between user interface and powerboard . solutions are usually expensive. just check that bridging connections at the terminal block are correctly in place.