Jura Capresso Impressa E75 Espresso & Coffee Maker Logo

Related Topics:

Posted on Feb 15, 2018

Jura E75 problem

Hi The coffee is not coming out the coffee nozzle. It doesn't seems to be blocked but neither the coffee or even if I run the rinsing process the water still does come out, I've performed the descaling & Cleaning using Jura tablets but still no use. pls any help? Thanks

5 Related Answers

Anonymous

  • 60 Answers
  • Posted on Jul 07, 2009

SOURCE: water will only dispense out of the frother.

It could be several soutions to this problem. First of all, try to clean the sieve in the brew unit, it may be clogged. Take out the tray, in between the 2 brown "lips" inside you can put your finger up and clean out all the old coffeegrounds stuck up there. Then put everything back in place and run a Rinse machine operation.

If this is not helping, listen out when you start up the machine; You should hear that the valve is turning 3 times, if it doesn`t it can be a problem with this valve not opening in right position. Then all the water would go out in the tray, and not into the brew unit. That maybe can be solved by changing this Multi ceramic valve or the Main Electronic board. Then it`s a job for a sertified Jura technician.

Ad

Anonymous

  • 1 Answer
  • Posted on Jul 20, 2009

SOURCE: Describe your Jura Capresso Impressa Z5 Espresso

will start by itself after it was shutoff for after
7-12 hours suddenly ? Why

Anonymous

  • 60 Answers
  • Posted on Oct 06, 2009

SOURCE: All water directed to Frother/ Water nozzle on Impressa C%

The Multivalve seems to be stuck. When you start up the machine you should hear the multivalve turning 2 times, if it`s silent, the valve is defective. This valve is important to guide the water in the right direction. Contact your servicedealer and let them have a look. There`s also a small chance that the electronic board are sending wrong or no signals to the valve

Anonymous

  • 60 Answers
  • Posted on Nov 11, 2009

SOURCE: Hi,

This is a really strange error, but it makes some sense if you own a S9 One Touch model. Then there`s a problem with the squeezing valve located behind the steam/cappuccino outlet. If this is an older model, then it could be a problem with the ceramic valve, but normally this makes the water flud all over the frontpanel and inside. In both cases, i would recommend to send the machine to the nearest servicecenter.

Anonymous

  • 10 Answers
  • Posted on Apr 15, 2010

SOURCE: Problem for Jura Capresso C1000 Espresso &

save a bundle, URNEX makes cafiza tablets, buy them by the 60 tabs or larger containers. Use them frequently and give some to friends. I've used them for years. find them online.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

The coffee is not coming out of the coffee spout

I had a similar problem. I always religiously cleaned the machine when prompted but nonetheless I reached a point where coffee quit coming out of one nozzle. I tried the suggestion to stick a wire up the nozzle to dislodge any residue that was blocking the water. That helped a little and then it did not next time. So I USED A DENTAL WATER PICK on both nozzles and that cleared up the problem completely. MUCH BETTER than wire or paperclip.
0helpful
1answer

No maintenance menu in Jura z5 program

Check your manual
The rear often has a trouble guide

MANUALS & Instruction Books are On Line
The Books & Manuals are more than likely on the manufacturers site. Often as downloadable PDF files

Search their support area for your specific model of device.
Try Google Search for a Manual or PDF File for the specific brand & model number.
Also check these Sites:
www.retrevo.com .... Manuals
www.office.manualsonline.com
0helpful
1answer

How to clean jura C5 grinder

How to access grinder itself? Where is it? My Jura C5 doesn't grind coffee beans at all. Firstly grinder has started with starnge noise and then stopped with alarm "no beans", now it doesn't start at all..
0helpful
1answer

My C1500 has started leaking water out the bottom. I think it is coming from the right-hand side, but not sure. It doesn't seem to be coming from the tank and it is coffee-colored water. Any...

I'm working on the same problem, I need someone who reads technical swiss-german to help. There is a pump on the bottom right that drives cold water into the boiler. The connector on the bottom of the boiler (brass to vinyl plastic) came apart on mine. On a german language expresso maker website there are several parts that address this problem, the difficulty I'm having is figuring out which part fits tthe boiler I have as apparently this is a problem on serveral version and there have been re-designed connectors (mine doesn't look exactly like the one in the picture
http://www.kaffeemaschinendoctor.de/ReparatursetsWerkzeug/Dicht-/Reparatursets/Jura-Reparatur-Dichtset-fuer-die-Heizpatrone::101.html
1helpful
1answer

I have an Impressa Z5 and it won't **** milk up the tube as either part of the cappucino program or the stand alone milk program. I've checked and nothing in the nozzle is blocked and the plastic pipe...

There are three possible causes to milk not frothing: 1. The frothing tap is blocked: to unblock either use the cappuccino cleaner from Jura, or in 400ml of luke warm water dissolve a teaspoon of vinegar or 1/2 teaspoon of bicarb and run this liquid through the frother until completely finished (or run the cleaning program). The run about 600-800ml of water through the system. While passing the liquid through let the tap rest at froth, and milk setting for 5 seconds at a time. Repeat if necessary. To prevent this in future clean frother after 5 minute of none use. 2. The breathing nozzle is blocked, you can use the Jura Maintenance guide to see how to disassemble and clean and reassemble, but most Juras come with a spare, so replace it. 3. The machine needs to be descaled, since there is lime or scale in it.
0helpful
1answer

No coffee will dispenses

I would remove the coffee spout and check the lines into it. The coffee seems to stop when it hits the spout and goes through the by pass instead. Remove the spout(be careful) then run a coffee and see if it works.
4helpful
1answer

On Rinse nothing comes out?

Do you seem to end up with more water in the tray now then you did before this problem started? Does your coffee seem weaker then before? If so I have some ideas for you.
Mike
0helpful
1answer

Malfunction light on Jura E75

I just called the company with the same problem today. They will fix your machine for free. They have recalled this machine. Call them and they will tell you what to do. 201-767-3999
0helpful
2answers
Not finding what you are looking for?

163 views

Ask a Question

Usually answered in minutes!

Top Jura Capresso Coffee Makers & Espresso Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Sulejman Sulejmani
Sulejman Sulejmani

Level 2 Expert

138 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Jura Capresso Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...