Check messages how do i check my messages?

Warning Messages The warning messages can interrupt the display until cleared or reset by the driver. The warning messages are either single cycle, non-resettable, or repetitive warning messages.
The single cycle warning messages display once whenever the ignition switch is turned to the ON position or a fault occurs in a system, and can be cleared by pressing the RESET button. The single cycle warning messages are:

• liftgate ajar
• liftgate glass ajar
• service emission system
• low brake fluid
• service brake system
• check left headlamp
• check right headlamp
• check left turn lamps
• check right turn lamps
• check left high beam
• check right high beam
• check brake lamps
• check parking lamps
• washer fluid low
• check fuel cap
• change oil soon
• change oil now
• low fuel
• service 4x4
• turn signal on

You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

Hi

When you send the message the error "message failed check detail" for this problem you have to check your message center number, if you don't have the message center number then call to your service provider and get the message center. then go the Message setting and set you message center number and then try to send you message, your problem is solve.


If you have for my advise, give me the four thumb

sending message came from the simcard sms setting...... check your message setting like message center..check the home network what simcard you used. by the way your phone receive message you can call or receive call if yes the problem of your phone is wrong message center number... check it
go to message/message setting/message center. check the number if correct or not..

Nokia 6700 clasic:
"Check info service" If you saw this message on your phone after a reboot, then:

Go Menu->Messaging->Message settings->Service messages and choose OFF all three stafs.

Disable= Service messages. message filter. autom. conncetion.

by <dimongrek>

Hi,

This is because the message centre number is wrong. so please check the service centre number which you given is correct. call the service provider and check the message centre number.
Make sure you kept this number in use for sending messages.

And also check weather the reply via same centre is in NO.

These options will in messages--->message setting--->text message.

Thanx

Greeting message
When the unit answers a call, callers are
greeted by a greeting message. You can
record your own greeting message or
use a pre-recorded greeting message.
Recording your greeting
message
You can record your own greeting
message (2 minutes max.).
1 {GREETING REC}
2 Within 10 seconds, press
{GREETING REC} again.
3 After the base unit beeps, speak
clearly about 20 cm (8 inches) away
from the MIC.
4 Press {?} (STOP) to stop recording.
Using a pre-recorded greeting
message
If you erase or do not record your own
greeting message, the unit plays a prerecorded
greeting message for callers
and asks them to leave messages. If the
message recording time (page 39) is set
to “Greeting only”, caller messages
are not recorded and the unit plays a
different pre-recorded greeting message
asking callers to call again.
Playing back the greeting
message
Press {GREETING CHECK}.
Erasing your greeting
message
If you erase your own greeting message,
the unit plays a pre-recorded greeting
message for callers.
Press {GREETING CHECK}, and then
press {ERASE} while your greeting
message is playing.
Listening to messages
using the base unit
When new messages have been
recorded, the message indicator on the
base unit flashes.
Press {6}.
L If new messages have been recorded,
the base unit plays back new
messages.
L If there are no new messages, the
base unit plays back all messages.
Operating the answering
system
Key Operation
{^} or {V} Adjust the speaker
volume
{7} Repeat message
(during playback)*1
{8} Skip message
(during playback)
{?}
(STOP)
Pause message
– To resume playback,
press {6}.
– To stop playback
completely, press
{?} (STOP) again.
{ERASE} Erase currently playing
message
*1 If pressed within the first 5 seconds of
a message, the previous message is
played.

check if this works and tell me if any issues

there are ways to trouble shoot this.
1. check your message center
>> open your menu, select settings, select applications, select messages, select message center, check message center address, if you have doubt that that is not your correct message center address, then ask from a friend with the same network to tell you what is the message center address or number.
2. check the signal of your phone
3. most important is, try to check your load if you still have.

good luck...

ROFL OW NED!!!!!

check the msg center no. in ur cell from da msg menu... if still cant... do one thing, sell & buy a new one...