Problem with my camera

What make and model?

Which version of Windows are you using?

This can be a hardware issue, failure of the circuit, the flash unit or the LED. In this case it is best to take opinion and support from Nokia care unless you are fully equipped to open and check and evenso the spare could be another issue.get estimate and proceed

You can download the manual here. Admittedly, the Vivitar site sometimes has problems, but I just successfully downloaded the full manual minutes ago. If you still can't get it, try again the next day.

Try pressing 0 on the remote. This locks and unlocks the screen for some reason

Please open the control panel >open program and features> Now check if the camera driver is present in the list. Is so click to remove/uninstall the program.
Once this is cleared restart and then connect the camera once again to check if this is detected. If not try with another PC to confirm if the fault is with the camera or the PC.

Samsung pl201 the zoom isn't working and stopping the camera from working normally. it says to take out the battery and try again. this hasn't worked.

Hi William,
To confirm if the remote control is working fine, aim the infrared emitter of the remote control to your cellphone camera, press any button key and check if the infrared will flash to your camera. Watch this video on how to do this trick.
Also, does the front panel button key of the TV isn't working?
Jdvillanueva

"My flash isn't working, I read the manual and did everything it said."
Hmmmmm .....

What does the screen show?
Is the camera on AUTO?

Last resort I guess is to go where you got the camera and ask them.

Have you tried to reset the camera to the factory defaults? To do this: have the camera in shooting mode - go to Menu - left arrow to reset - press ok - Highlight Yes and press ok. This will reset the camera to factory settings. See if flash works now.