DVD (JVC XV-S502) Does not eject dvd. Word "lock" appears in screen

Hi there,

The disc lock function has been activated on your JVC XV-N320, when in this mode the tray cannot be opened or closed.

If you press the 'eject' button whilst pressing down the 'stop' button on the machine in standby mode the disc lock will deactivate. To turn it back on you follow the same procedure. This is also described in the user manual for this model of TV umder trouble shooting on page 13.

Hope this helps,

James

Try this link: http://www.videohelp.com/dvdhacks/jvc-xv-n322s/5424#30023
1. When "REGION CODE ERROR" shows on screen after you've input your wrong-region DVD you push "ON SCREEN".

2. When the DVD-menu is showing push "ON SCREEN" again and another DVD-menu will appear.

3. Move the arrow over to the clock and press enter. The menu asks for "TIME" and you write 0:00:00 and push enter.

4. You will now see the menu for the movie. Remove the DVD-menu by pushing "ON SCREEN" once. You can now watch the movie.


(Tested and Worked!)


Report this hack (requests/questions/spam/wrong/****).-->
Region code hack posted by Alex2000, October 31 2009:
Your hack is GREAT!
Works fine on the JVC XV-N342 too.
And right for JVC on the ESS chip:
JVC XV-N320, XV-N322, XV-N330, XV-N332, XV-N340, XV-N342
and so on.
Thanks!

There may be a connection to the problem, but it sounds like the laser assembly may need to be replaced as well as/or the mpeg printed circuit board(the printed circuit board) attatched to the laser assy. Good Luck.

try to press the "stop" button and then eject it.

When you press the eject botton while pressing down the stop botton on the unit in
standby mode, the tray lock function is activated. The disc tray
cannot be opened or closed in this status. To release this
status, press the eject botton while pressing down the stop botton on the unit in standby
mode.

Hi there, I just had the same problem with my daughter, looked in the manual and it says to hold down the stop button and press the eject button on the unit. That should unlock it, its the same procedure to lock it, in case you want to prevent you daughter from attempting to play biscuits!! 
Regards, darren

Dear friend,
press and hold stop+play button on the front panel of the dvd player more than 15 sec the player will be unlock

Though it may be different for different models, the JVC XV-N40 DVD Player LOCK can be disengaged (and engaged) by pressing the [EJECT] button while holding-down the [STOP] button. Yes, it's that simple but I had to search online to find it too. The XV-N212 did not appear on JVC's website when I looked for it there.

Here's a link to the material that coves with the player in the box:
http://resources.jvc.com/Resources/00/00/96/GNT0027-001A.pdf

Happy viewing to all!

you need to find the unlock code for it. check the web site for the model number that you have and look for the unlock code

Dear friend,
It is a software problem.Reflash ur dvd player.