Web cam driver YHT v.1.3.8.DTM not working...

If the web camera came with an installation disk, use the disk to install drivers then plug the web camera in a USB port. The computer should recognize it. If it is properly recognized it will work with all applications that support a webcam (Skype, MSN, Google chat..) If it is not recognized and you do not have an installation software, you should go to the manufacturers web site to download appropriate drivers.

Hi! don't worry with the driver..you can choose it from here..
just click the file...and click " save " to start downloading....using winrar (and or winzip), extract the file and install driver for your web cam

1. a4tech PK-635 web cam (rar) file
2. a4tech PK-635 web cam (zip) file

But first connect your web cam via usb slot on your computer... wait till a message on the taskbar appear: found new hardware..once ask for a driver.. choose one from the driver and install it.

Just follow this step and your web cam will work again.

Please rate this solution if you successfully installed your web cam....thanks..

To set up web cam you need driver cd. Place it in dvd/cd drive. Now connect web cam to working usb port. Then computer will notice you that it found new device and searches driver of it .install it from cd drive now you can run web cam in your computer.

Some webcams do not need drivers so it is certainly worth a try.

If however it does request them then let it go onto the internet and try find them for you.

If that fails you will need to go to the manufacturers site and download them from there



If you found this information useful then please click below

hi

1.) insert the cd that came with the web cam
the auto run will start,
2.) connect the web cam and follow the on screen instructions this will do the work for you,

incase you dont have the cd, sometimes windows has the drivers that it need so you can just connect it, If windows does not have the drivers or you lost the cd

1.) get a program like driver magician
www.drivermagician.com or www.phazeddl.com ( search it there)
2.) connect the web cam
3.) install and run the program, this will detect, download and install the drivers for you.

good luck and let me know if you need further help

If you bought a new 1.3 mega web cam with that a driver cd is available. If you have the driver cd install it first. here is install steps.

1. unplug the web cam if you connected to the system
2. Put the web cam driver cd into the cd drive and install the driver software.
3. In the installation it will ask you to connect the web cam to the system and connect it (Only it ask to connect)
4. After that you can see the image on the web cam software.
5. Adjust the lens which is comfortable to see.

These are intial steps to work the web cam just try it and inform me if you get any other thing

pl send us the driver for zen web cam.

go to this link 
here you can download driver for 13 k web camera,100 k web camera,300 k web camera ,350 k old web cam,350 k new web cam,480 k web cam
http://www.zippysltd.com/webcamera_drivers.htm

Just follow the link

http://www.zippysltd.com/webcamera_drivers.htm

Thanks

Ashish

you can get the drivers under support tab at jascoproducts.com