Cant connect! I have a motorolla surfboard sb5101 and im trying to hook my d-link dl-624m wireless router and cant get a connection what do I do plz hlp me thnx. 2-locc.

http://www.ehow.com/how_8316853_reset-motorola-sb5101-modem.html

The ISP modem (cable) connects to wireless (yellow port) PC and other devices connect to any port available on wireless. This is the standard setup.

it should be written on back of your internet router its the wireless key thanks

I have a similar problem. The common denominator seems to be the SB5101. I have a brand new Belkin Surf 300N, same issue. The modem will not give DHCP to the router. I can connect fine via ethernet to the modem directly.
This modem seems to be a dinosaur.

Hi, follow the steps below to configure MR814 with your motorola surfboard:

CONNECTIONS:

1. Connect a Ethernet cable from the modem to the WAN port of the router (isolated port).
2. Connect the computer to the router using any one of the 4 available ports. Please make sure that there is no direct connection between the modem and the computer (either using Ethernet cable or USB cable).
3. Power off the modem and the router after making the connections.
4. Power on the modem and wait for the lights, then power on the router.
RECONFIGURE:
1. Open the browser (Internet Explorer, Mozilla Firefox or Safari).
2. Access the router, usually with http://192.168.0.1
3. Login to the router with the Username as "admin" and Password as "password" (please note that the Username and Password are case sensitive).
4. Click on 'Basic settings' from the left menu and select 'Use Computers MAC Address' from 'router MAC Address' section.
5. Click Apply.
6. Once it updates the settings then power off the modem and the router. Power on the modem and wait for the lights, then power on the router.

I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion with the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Regards
Anand

You need to disable the UPnP function on the Belkin router. Log into the router(192.168.2.1), and look under System Settings. If you haven't changed the password on the router, the default password is blank, i.e., no password.

you cant connect usb and ethernet on that modem at the same time you have to use a router

all you need to do is to connect the ethernet cable to the internet port on the back of the linksys router and then plug the routers power cord into the wall and you should be ready to go.

You have to reset the modem from behind (little pin hole) with the modem and router not connected via ethernet, the let it restart and reset the router after both are reset connect the ethernet cable between them.

unable to log into router user 192.168.0.1 d-lin 624m