Quickly press alarm 1 button to deactivate it when the radio and everyday or mon-fri icons are gone the alarm is deactivated. do the same for alarm 2 button and the sd1-4 or buz icons disappear.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Timex T307S
I lost my manual also so had to resort to relentless trial
and error.
The problem with the alarm is that it is too easy to turn it
on.
The 1 and 2 buttons on top of the
unit with the alarm clock symbol turn each alarm on or off.Your only cue is on the display in the top
line of the display which will have a bell followed by “RADIO” or “SOUNDS”, if the alarm is armed.If you see this symbol and want to disarm the
alarm, press the 1 or 2 alarm button according to which alarm was on the
display.It’s just as easy to turn the
alarm back on either deliberately or accidently
Enter Alarm Setting mode by holding the 1 or 2 alarm button
for about 2 seconds.
Display will flash – in this mode you will be able to do the
following
Date Set Button – changes between
Everyday/Mon-Fri/Sat-Sun
Arrow Buttons – adjust the time
setting
Alarm 1 (Radio):
Mode Button – changes between
AM/FM1/FM2
1-6 Buttons-- changes between stations
Alarm 2 (Sounds):
Mode Button – changes between SD1/SD2/SD3/SD4/Buzzer
If you don’t change any settings
for about 5 seconds the unit exits the alarm setting mode.
Timex already has your money so I guess they are not motivated
to publish their manual.
the power button is on the right hand side, top button in the row. It is engraved with POWER and underneath it says SLEEP. You might need to hold it in for a second or two. If this does not turn on the radio, it sounds like your unit is defective.
if the radio alarm is still showing the nonexistent 98.5, you would need to reset the radio alarm. Press and hold button 1 (top left hand side) until the display starts blinking. Then press the preset button for 98.1. It should then display 98.1 on your radio alarm.
good luck this is the most difficult set of instructions I've seen yet
×