GOGO TRAVELLE throttledoes not brake when it comes to a stop

Not there isn't. It is a combined motor, brake and gearbox. Don't just buy a new one, find out what is wrong with the old one.

https://www.monsterscooterparts.com/mobility/mobility-brands/gotrmo/goeltrs/motor-brake-and-transaxle-assembly-for-the-go-go-elite-traveller-sc40e-sc44e-and-ultra-x-sc40x-sc44x.html

https://www.google.com/search?q=gogo+elite+traveler+sc40e+won%27t+move

..

What the hell is a GoGo Ultra?

hi Hal, that is a issue around based the brake or connectors to the brake or the micro-switch that is moved when you move the drive , freewheel lever.. ... firstly make sure the scooter is in drive mode and not free-wheel mode ., where the axle comes apart you will see a number of connectors , make sure they are a good fit ...

Update me please...

Regards
Rob

This is due to the controller shutting down. Make the brake leverin the on position

Hi Scott, the brake itself could be failing or the other issue could be the controller itself or simply a bad connection (hopefully), so check the connections from the brake to the controller

Regards
Rob

www.gewizrepairs.co.uk

The park brake has got stuck, the brake needs to come off and be stripped down and cleaned, this will sort it.

Contact a local DME dealer in your area or, on the internet. Give them your serial number for the GOGO to order a new solenoid brake. It is important to have your serial number when ordering to ensure you get the correct part.

hi, it means that the brake is giving the incorrect resistance , this can be because of a faulty micro-switch or simply a bad connection to the controller so worth checking ..

Please note : i offer a free controller and brake testing , you only pay return postage ..

Regards
Rob

www.gewizrepairs.co.uk

hi, so would it be right to say you can still push it when you stop ?
The brake simply stops the scooter from moving , it does not slow you down, the motor does that.

Does the brake click when it comes to rest ?, if the scooter has not been used for sometime or kept out in the cold it can start to seize, so spray some WD40 or contact cleaner would be best in the slot around the brake area now remember you just lubricated the brake so don't go near hills or road until you used it and you're sure the brake is working again.


Regards
GeWiz.

adjust cable