Ink low indication on HP Deskjet F4288

hi
you have a bud refilling process 
check here how to refill right fro black
http://www.youtube.com/watch?v=MPi2GqJg5QM
for color http://www.youtube.com/watch?v=C6-N-Pxmjxk

European and USA Xerox docucolor toner cartridge parts numbers, chek out on Xerox.com check part numbers USA versus UK or Germany.......bob

The link level display doesn't always show the correct information. To begin, try to wet the part where the ink flows, with a damp paper towel or just a towel. Sometimes the ink just dry up. If that does not work, you probably need another black ink. If there was a problem with the printer itself you would had been notify by the computer, you know, like a pop up window. 

To clean the HP Inkjet print cartridges from the HP Toolbox, using a Windows operating system, perform these steps:

1. Double-click the HP Toolbox icon on the computer screen.
2. Click the Printer Services tab.
3. Click Clean the print cartridges and follow the directions on the screen.

If the print quality improves after completing this sequence once, but the quality is still not quite good enough, repeat procedure. Start at Step 1, or click the Clean Again button on the final cleaning window. If this process does not improve the print quality, the HP Inkjet print cartridges might be low on ink. See the document that is provided with the black HP Inkjet print cartridge for instructions about how to use the ink level sensor to determine if the cartridge is low on ink. Replace the HP Inkjet print cartridges, if appropriate.

my printer number is hp deskjet f4288 all in one my problem is my colour catridge haveing ink but but showning error in colour side please send me immediate a solution

You cannot reset the ink level indicator for the HP 60 ink cartridge. It shouldn't matter anyway because the level is only estimated for "management purposes only" (see user manual) meaning to let you know when it's near time to order a new cartidge. I have tried cycling through 3 different cartridges to reset the ink level for the one I refilled but it didn't work. Refill and just ignore the ink level indicator. Also, it's a good idea to clean the print heads with the solvent in the refill kit before refilling to remove old ink and imrpove print quality.

What many people do not realize is that an ink cartridge and printhead must be used on a regular basis to function properly. Recommendation is a few pages each week. If not, the liquid ink will dry and block the nozzles. First course of action is to purchase new ink cartridges. If this does not work, than purchase new printheads. However, it would be less expensive in the long run to just buy a new ink printer with the cost of ink printers being as low as they are.

Popular Mechanics did an article on this very subject a few years ago and there is a software program on the market that will automatically print a page or two every week to prevent this problem.

You have submitted this problem in the Epson R220 area - it is unlikely to produce a response here. Try again putting it in the HP 990 area.

You cannot reset the ink level for the HP 60 ink cartridge. Simply ignore the ink level indicator if you refill your cartridges. It is only an estimate of the ink level anyway. See pg 72 of the user manual.

some printers share the ink from color to black but you can select if you wants to use only black just go to printer than properies than select to use only black but you probably have to remove the empty color one