No mist, but i can see a water droplet fountain on the surface

Question edited to add maker.

Set too high or the room is too cold.

Lots of models, and all produce water in mist form, and the droplets have to land. It is the nature of the machine.

https://www.google.com/search?q=Air+o+swiss+humidifier%2C+too+much+mist

..

Yes Truly Blessed, we do have all the manuals if you can find the model number on the label. They are all listed here on our website.

Home Comfort ... - Sunbeam Canada Instruction Manuals

https://www.sunbeam.ca > home-comfort > humidifiers

Instruction Manuals for Home Comfort Products, Humidifiers. ... SUL1410-CN - Sunbeam® Ultrasonic Cool Mist Humidifier Instruction Manual EN-FR · 1361-705 ...

You can get filters from us

Humidifier Filters & Accessories: Find your filter ... - Sunbeam

https://www.sunbeam.ca > en_CA > home-comfort > hu...

Find your filter for your Sunbeam® humidifier to keep the air in your house comfortable, water treatment tablets offer a light scent to the mist from your humidifier.

and also from our Amazon resellers

Sunbeam Humidifier Filter - Amazon.ca

https://www.amazon.ca > Sunbeam-Humidifier-Filter

Results 1 - 48 of 849 - IOppWin 6 Pack Humidifier Filters Replacement for''A'' Holmes Filters, Compare to Part # HWF62, HWF62D,Compatible with Sunbeam Cool ...

with cool mist humidifiers your not suppose to see any mist. if it's a warm mist there should be. but by your model number i'm finding that it's a cool mist. that's why your not seeing any mist.

I have this same problem. And cool mist humidifiers DO produce mist. I have had my humidifier for a while now (6 years) and have never had any problems. But after the most recent cleaning, it worked at first, but now seems to not be working anymore... Am also wondering if there is anything I can do to remedy the situation?

I see you have been waiting on a response for some time and I suggest you contact Sunbeam (if you haven't done it already) at their website for Canada:
Sunbeam Canada Customer Service 

Located My Manual:
Hope this helps!

1. Remove tank from base. Turn upside down and unscrew filling cap. Fill tank with clean, cool, distilled, or tap water. Water temp should NEVER be too hot or too cold. Return tank to base and let sit for a few minutes. Be sure the filling cap of the tank is tightened firmly.

2. Plug power cord into a 110-120V AC wall outlet only. Turn power switch to "on" position. Power light will illuminate. Turn mist nozzle until desired level is being released. Aim nozzle away from furniture and walls.

3. Always turn humidifier off when water runs* out. Unit will continue to operate when tank is empty.
*Humidifier will run up to 12 hrs on low; 6 hrs on high.

DO NOT LET WATER SIT IN TANK FOR LONG. THIS CAN ENCOURAGE BACTERIAL GROWTH.
Place unit on level surface away from direct sunlight.
DO NOT ADD MEDICATION OF ANY TYPE INTO THE NOZZLE, BASE, OR WATER TANK.
ALWAYS LEAVE ROOM DOOR PARTLY OPEN. DO NOT MOVE, TILT, OR EMPTY WHILE OPERATING.

Mild bleach and water solution for cleaning, never detergent.
Clean every 3rd day during use. Clean after long storage
Humidity varies from room to room. Aim for 30 - 50% relative humidity. If windows/ walls fog or frost, reduce mist intensity. If room too humid, ventilate by opening door or window; adjust mist intensity.

The Problem is minerals in the water. Impeller and ultrasonic designs send these minerals into the air. If the water in your area contains a lot of minerals, you will notice them as dust. The EPA does not issue health warnings about minerals in the air, but does recommend using low-mineral water (such as distilled water) in your humidifier. Many ultrasonic models feature a demineralization cartridge that filters minerals out of the water to prevent the dust.

Good Luck.

sounds like the small fan that is located in the base isn`t pushing the mist out. unplug it then take all the screws out of the base. there are screws under the black foam stands too. be careful not to touch anything that looks like live wires while you look inside then look inside while it is pluged in. it should turn. check for something blocking it like lint or dirt..you may be able to clean around the shaft with w d 40