Kirby Generation 3 Bagged Upright Vacuum Logo
Justin Laird
Justin Laird Posted on Aug 03, 2007
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Power problem I just recently moved into a new house and sometime during that move my Kirby Generation 3 vacuum has quit working. I used it last at my old house just before I moved, then loaded it up in the back of my truck, took it 20 miles to my new house and about three weeks later plug it in to use it, and nothing. No light comes on or anything. I thought there would be a power reset button somewhere on the machine that I could try, but I couldn't find one anywhere. Do you know of a reset swith or button anywhere on a Kirby Generation 3 vacuum? Or if you have any other idea of what might be the problem please enlighten me. Thanks, Justin

Answer This Question
  • flow40 Nov 11, 2007

    My vacuum just stop working while I was using it.

×

3 Answers

Anonymous

Level 1:

An expert who has achieved level 1.
Corporal:

An expert that has over 10 points.
Problem Solver:

An expert who has answered 5 questions.

  • Contributor 10 Answers
  • Posted on Apr 19, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
Corporal:

An expert that has over 10 points.
Problem Solver:

An expert who has answered 5 questions.

Joined: Apr 16, 2009
Answers
10
Questions
2
Helped
5430
Points
14

Either a bad switch or cord.

  • Anonymous May 26, 2009

    If you can't fix the power problem, you need to take your vacuum to a repair shop. Or, buy a Kirby vacuum that works GOOD.

×

Marci Marple

Marci Marple

Level 2:

An expert who has achieved level 2 by getting 100 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

  • Expert 357 Answers
  • Posted on Oct 23, 2007
Marci Marple
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

Joined: Oct 16, 2007
Answers
357
Questions
4
Helped
172220
Points
543

Here is the link to my Kirby troubleshooting guide for home repairs. Hope it helps!!!

 

http://reviews.ebay.com/COMMON-PROBLEMS-WITH-THE-KIRBY-VACUUM-TROUBLESHOOTING_W0QQugidZ10000000003800312

 

Marci

Ad
A

Anonymous

Hi, Try logging your post on the Kirby Trading Forum at Kirbydirect.co.uk - you'll be sure to get a reply. John

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Kirby carpet shampooer won't turn
KIRBY CARPET SHAMPOOER INSTRUCTIONS MANUAL DIRECTIONS
Read full answer
May 27, 2014 • Kirby Generation 3 Bagged Upright Vacuum
0helpful
1answer

My kirby won't work
It is the rubber belt that spins the brush. It must have worn out. Buy a new one.
http://www.amazon.com/Kirby-Cleaner-301291-3-Generation-Ultimate/dp/B0014SQVKK
Read full answer
Nov 25, 2012 • Kirby Generation 3 Bagged Upright Vacuum
0helpful
1answer

I have received a vacuum with my house rental to use-a Kirby Generation 3. It turns on but the brush doesn't appear to be working. I would like to take it apart to check the belts but can't find...
Hello, this is Ava with Think Crucial.

You may find the User's Manual for your Kirby model by clicking the link below.

http://kirbywhq.powweb.com/manuals/Gen3/660ED597CB31973F693F1DBDFF0E4F72/Generation%203%20Manual.pdf

You can purchase a wide variety of high quality Kirby replacement parts for your Kirby vacuum direct from Think Crucial with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10

https://www.thinkcrucial.com/collections/vendors?q=Kirby

I hope this was helpful.

Ava B.
Think Crucial Customer Care
http://www.thinkcrucial.com/
Read full answer
Sep 22, 2011 • Kirby Generation 3 Bagged Upright Vacuum
0helpful
1answer

Kirby G# handle leans to the front of the vac and when you vacuum it tries to move to fast and front pops up
A pin secures the handle in place securely. Is it missing?
Read full answer
Jun 30, 2010 • Kirby Generation 3 Bagged Upright Vacuum
2helpful
2answers

We have a kirby generation 3 and it slows down and speeds up almost sounds like it is going do quit could this be a brush problem in the motor sometimes it will quit.
You may need to service you Kirby. Go this page HERE, fill out Service Request Form and ship to us together with you Kirby. We will inspect it and will call you with an estimate.

Good Luck,
Rocky
Read full answer
Dec 09, 2009 • Kirby Generation 3 Bagged Upright Vacuum
0helpful
1answer

My kirby generation 3 wont come on
Make sure cord is not damaged. Check to see nothing is blocking hose or carpet nozzle(where beater brush is or brush roll). Plug unit in to a receptacle that you know has power going to it. (Lamp you know works when plugged into same. Using hose on front, make sure bag bottom completely attached to exhaust, the hose has a little arm like thing that will depress the safety switch on the front of the unit, and turn on using foot switch at the back of the unit. If these do not work, it could be one of two safety switches, dirt may have fouled or switch may need to be replaced. Authorized Kirby Dealer in your area: Replacement parts, Kirby Distributor, call: 1-800-437-7170 United States and Canada
Read full answer
Nov 01, 2009 • Kirby Generation 3 Bagged Upright Vacuum
0helpful
1answer

Replace the roller on my kirby vacumm generation 3
http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=814340
Generic problem for all Vacuums
Replace the roller on my
Posted by tlourene on Jul 21, 2008
Replace the roller on my Kirby Vacuum Generation 3
Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. In order to replace the brushroll on the Kirby G3 you need to dial off the belt and then release the lever to remove the bell housing, then there are 2 levers that you need to open then you can get @ the brushroll --- take out the brushroll and replace the brushroll and a new belt – make sure you change the belt every 4 to 6 months for the best cleaning. Make sure when you put the new belt in the housing that the screw heads are facing down – then you can replace the bottom plate, dial the belt on to the belt pulley and replace the bell housing. If you need further help please refer to a local vacuum cleaner dealer in your area. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://kirby.com/
Customer Service – U. S. & Canada
1-800-494-8586
Hours 8:00 am to 5:00 pm (EST)
Mail To: Consumer Relations
The Kirby Company
1920 West 114 Street
Cleveland, OH 44102
Thanks, Don the Vac Man
Go Ahead. Use Us.
Read full answer
Jul 21, 2008 • Vacuums
0helpful
2answers

Kirby
http://geeksquad.fixya.com/ThreadView.aspx?prdid=11560&thid=798201
Kirby
Posted by ronholliehaw on July 17, 2008
Hello, I have a Generation 3 Kirby- it was working - I turned it off & it will not turn on again - is there a safety switch /reset button or did the on/off switch go out - I have had it 15 years & replaced the switch 1 time - Thanks
Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The chances are it is the safety switch 1st and the foot switch 2nd. The safety switch is in the front of the fan housing of witch the bell housing hooks into. Both are about the same price plus labor. So feel free to do it yourself or to contact your local vacuum cleaner dealer in your area. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://kirby.com/
Customer Service – U. S. & Canada
1-800-494-8586
Hours 8:00 am to 5:00 pm (EST)
Mail To: Consumer Relations
The Kirby Company
1920 West 114 Street
Cleveland, OH 44102
Thanks, Don the Vac Man
Go Ahead. Use Us.

Read full answer
Jul 17, 2008 • Kirby Generation 3 Bagged Upright Vacuum
0helpful
1answer

Power problem
I would replace the power switch. Here are the instructions for the repair...
http://reviews.ebay.com/REPLACING-THE-POWER-SWITCH-ON-ANY-KIRBY-G-SERIES-VACUUM_W0QQugidZ10000000003752018
Marci
Read full answer
Nov 10, 2007 • Kirby Generation 3 Bagged Upright Vacuum
Not finding what you are looking for?

View Most Popular

Generation 3 Bagged Upright Vacuum

  • Vacuums

Related Question

Kirby carpet shampooer won't turn

  • Kirby Generation 3 Bagged Upright Vacuum

Related Topics

501 views

Ask a Question

Usually answered in minutes!

Popular Questions

Shampooer instructions

Kirby Ultimate G Bagged Upright...

My kirby ulitimate G series will not turn on

Kirby Ultimate G Bagged Upright...

What year was the Kirby vacuum sentria G10D made

Kirby Ultimate G Bagged Upright...

I have a kirby g4 how do i make it blow air

Kirby G4 Bagged Upright Vacuum

Manual and tools kirby g4

Kirby G4 Bagged Upright Vacuum

Check out the Latest Vacuums Report
Check out the Latest Vacuums Report

View all Fixya Reports

Top Kirby Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Paul Bade

Level 3 Expert

1818 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...