We have a Sterling 1100E induction hob and have random problems with the hob not working at all, and tonight it just sits there in darkness but peeping constantly. The 2 ceramic rings work but not the

A) https://hobguide.com/induction-hob-cannot-detect-pan/

B) https://hobguide.com/induction-hob-not-working-on-one-side/

You are advised to not try to get into the electronics of the induction hob. Such is dangerous. The unit uses 3 phase electricity, something unlikely to be addressed by DIY activity if you want to be safe. Check your warranty. I assume this is not a matter of pans of the wrong material or size being deployed. This well may require a technician to sort out. The brand/model has not been identified so I cannot direct you to further resources. Your user manual surely provides a company name where you might seek some customer support.

check votage when numbers disapear if no voltage bad transformer if voltage check ignitor

Unfortunately, Induction hobs on domestic cookers have always been a problem. A single, one ring catering hob is $1,200 and is expected to last 2 years in an industrial environment.

There are two videos here, but I reckon you will need a service call.

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk01r2k0Xw_ZCF69PXpLMkc_N2QzdIQ%3A1608069741109&ei=bTLZX5KRBtfRtQb9wp6IBQ&q=belling+induction+hob+e5+error+code

..

It is listed as a ceramic hob, not induction

As with all appliances. When in doubt turn off the main breaker to your hob. Wait 20 seconds. This might fix it. Next try a different element. Some of the ranges require you to turn the breaker on with cook top covered. If it still has problems try changing your frying pan.
Buy it from a repeatable store so you can return it if it is not the pans. Lastly. Try moving it in the surface as it will click until it finds the pan. Good luck.

hi,
is it possible to replace a cracked glass on my Neff induction hob?
where would I get the glass for my Neff induction hob replaced?
is it very costly?
the model number is t4483x2/09

assets.glendimplex.com.au/.../444447973_STOVES_Sterling_1100DF-A_SML.pdf

It is OK. The voltage was the problem. As soon as we went on to proper power again the hob worked normally.