- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
E29 usually means that machine didn't fill quickly enough if it's a new machine it could be the water turned off or if you have been using the machine before it could be blocked inlet filter or collapsed hose internally or linked hose
E14 stands for an error code concerning the flow meter. This is a sensor which mesures if enough water comes into the machine. There are several causes. Did you open the faucet enough or is there some dirt in the sieve between the aquastop and the faucet?
Pretty sure that indicates that no water is getting into the machine, could be as simple as a dirty hose filter ( turn off water supply and check filter on inlet hose both ends) or even that the tap is off. Could be the inlet valve or flow sensor faulty. Worst case scenario is a module fault.
cheak the filter witch is at the intake and if when it is going to fill does it buzz if dose that means the vale is working if not call a repaire man out hope this helps
×