My SanDisk Sansa Clip won't charge, it say's it's connected with the charging bar moving quickly back and forth

Question edited for a lot more clarity.
Question moved from Misc to model category.

Replace the internal Li-Po battery, but try a reset first.

https://www.google.com/search?q=sandisk+sansa+c240+battery+replacement


If your Sansa player is freezing, not charging or not turning on, the first thing to try is a reset of the unit. This will normally clear any temporary condition that may cause the player to freeze or not shut off completely, it's a bit like when your PC crashes and you need to re-start it to clear the error.
Dec 28, 2020

My Sansa MP3 player has stopped working or charging

Sansa Clip Won't Charge - iFixit

iFixit https://www.ifixit.com > Answers > View > Sansa+Clip...

Feb 15, 2021 - I found an older Sansa Clip which will power on when connected to a USB charger or to the computer, but it won't boot up or hold a charge.
1 answer · 1 vote: Hi, Sounds as though the battery has failed and needs to be replaced. I couldn't find a battery replacement guide for a Sansa Clip but here's a video ...
How to replace dead battery in Sansa Clip mp3 player?
Oct 1, 2010
Why is my clip say tranferring and not charging
Jan 16, 2017
Where can I find a new battery? - Sansa Clip Plus
Mar 27, 2017
My MP3 player won't turn on once I remove the charger.
Aug 3, 2015
More results from www.ifixit.com

Sansa Clip Battery is not charging - SanDisk Forums

sandisk.com https://forums.sandisk.com > sansa-clip-battery-is-not-...
Jun 4, 2008 - You can try to charge the device first, to make troubleshooting easier. Unplug the device, then select Settings, then USB Mode, then MSC. Now ...
SANSA CLIP ZIP NOT TURNING ON, NOT CHARGING
Feb 27, 2013
Sansa clip won't charge - SanDisk Forums
Jan 4, 2010
SanDisk Sansa Clip+ doesn't charge, doesn't turns on or ...
Nov 2, 2016
Sansa Clip Zip battery won't charge, goes straight to song ...
Nov 28, 2014
More results from forums.sandisk.com

Maybe your cable has a broken wire in it. This happened to me and I had to bend the cable back and forth. When it connected so I knew it was the cable, I just got a new one.

no I don't have the answer I am experiencing the same problem

I have a similar problem but when I use mine, it lasts 3hours per bar on the meter. It only does up to 98% and it overheats. If you take it off and let it cool and monitor it as it charges, you can get a full battery. Take it off charge around 70% and turn it off. Wait 2 hours and put it back on charge until it reaches 100 then take it off and it is charged. To see the battery charge

My Computer > Sansa Clip ?gb (Right-Click) > Properties
Look down at a battery shape with a green bar and a percentage beside it.

This is direct from the sansa FAQs at http://www.sansa.com/support/sansa_clip/faqs 02. Why won’t my Sansa Clip charge when I connect it to my computer? USB Cable
Make sure that the USB cable is properly plugged in and use the original cable.

Computer in Hibernation mode
Make sure that the computer isn’t entering hibernate or sleep mode while the device is connected. The computer must be on in order to charge your player.

USB Port 2.0
Make sure your player is connected USB 2.0 port (1.1 occasionally causes charging problems).

USB Port location
Try plugging in different USB port (i.e. USB port in the back of the computer); sometimes the front USB ports have problem charging up the device.

Battery
Make sure the battery is fully charged. It takes approximately 3 hours to fully charge the battery.

Latest firmware
Make sure to update firmware by downloading and installing the Sansa Firmware Updater.

I hope this helps, and don't forget to rate the answer.

You will definitely need to get that USB charger cable.

Run the Sansa Recovery Tool from Sandisks' website and start over from scratch. Usually this problem is caused by trying to transfer too many songs at once, but any number of Rhapsody errors could have caused this.

-Tha Mp3 Doctor

You need the latest firmware update from Sansa' website - may require a restart of computer after performing.

change the battery you can buy it at sandisk.com.