How to set clock on kenwood kdc-mp628 - Kenwood KDC-MP628 CD Player

SOURCE: Kenwood KDC-MP628 unlock code

press the auto and track up, on the face at the same time. The four digit line should go away, then use your remote and enter yout code

The code is 5227

press the numebers: 5 (two times) then press the track up key
2 (three times) then track up
2 (1 time) and track up
7 (two times) track up key again

SOURCE: Kenwood KDC-MP208 Clock Set

Make sure that the source is set to "Standby" when trying to access the menu. It took me about an hour to figure it out and afterward I felt like a ******.

SOURCE: KENWOOD KDC-138 SET THE CLOCK

set the unit to standby and press and hold the select button.(the up,down,left, right button on the left of the cdplayer)

Frank Fulton

• 1114 Answers
• Posted on Nov 18, 2009

SOURCE: I have a kenwood radio model kdc-135 and can not set clock or sh

http://www.kenwoodusa.com/UserFiles/File/Global/Consumer/Manuals/KDC-135.pdf Here's the manual link from Kenwood and it's on page 13. Hope this helps

SOURCE: how doyou set the clock?

In standby mode
Manual clock adjustment
1 Select clock adjustment mode
Push the Control Knob towards FM or AM
Select the CLK ADJ display
2 Enter clock adjust mode
Press the control knob for at least 1 second
The clock display blinks
3 Adjust the hours
Push the control knob towards FM or AM
Adjust the minutes
Push the control knobs toward [<<] or [>>]
4 To exit clock adjustment mode
Press the menu button.

Testimonial: "the feedback i got was very helpful,thanks a bunch!"