"wired" light

aaaa more info your new plug should be marked as to what to connect to , DONT drive your self insane do one wire at a time and with a test light im guessing this is a rv flat spaded plug as i said start with one thing at a time turn on just running lights not headlights running lights that will put power in on wire only and that you want to connect to your plug running lites next shut off lights ,turn on a signal light signals will be a blinking light only on one wire.

For 1999 Ford Explorer Car Stereo Radio Wiring Diagram check this...

Car Radio Constant 12V+ Wire: Light Green
Car Radio Switched 12V+ Wire: Yellow/Black
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Light Blue/Red
Car Radio Dimmer Wire: N/A
Car Radio Antenna Trigger Wire: Blue
Car Radio Amp Trigger Wire: N/A
Front Speakers Size: 5 x 7
Front Speakers Location: Doors
Left Front Speaker Wire (+): Orange/Light Green
Left Front Speaker Wire (-): Light Blue/White
Right Front Speaker Wire (+): Dark Green/Orange
Right Front Speaker Wire (-): White/Light Green
Rear Speakers Size: 5 x 7
Rear Speakers Location: Rear Door
Left Rear Speaker Wire (+): Gray/Light Blue
Left Rear Speaker Wire (-): Tan/Yellow
Right Rear Speaker Wire (+): Orange/Red
Right Rear Speaker Wire (-): Brown/Pink


Hope helps (remember to rating this free answer).

2000 Ford Explorer Stereo Wiring

Front Speakers 5" x 7" Doors

Left Front (+) Orange/Light Green
Left Front (-) Light Blue/White
Right Front (+) Dark Green/Orange
Right Front (-) White/Light Green

Rear Speakers 5" x 7" Rear Door

Left Rear (+) Gray/Light Blue
Left Rear (-) Tan/Yellow
Right Rear (+) Orange/Red
Right Rear (-) Brown/Pink

Constant 12V+ Light Green
Switched 12V+ Yellow/Black
Ground Black
Illumination Light Blue/Red
Dimmer n/a
Amplifier Remote Blue
Antenna Right Front

Best wishes!

Constant 12V+ Green/Purple

Switched 12V+ Yellow/Black

Ground Black/Light Green

Illumination Light Blue/Red

Dimmer n/a

Amplifier Remote Blue

Antenna Right Front

Front Speakers 5" x 7" Doors

Left Front (+) Orange/Light Green

Left Front (-) Light Blue/White

Right Front (+) White/Light Green

Right Front (-) Dark Green/Orange

Rear Speakers 5" x 7" Rear Doors

Left Rear (+) Gray/Light Blue

Left Rear (-) Tan/Yellow

Right Rear (+) Orange/Red

Right Rear (-) Brown/Pink

best wishes

1995 Mercury Cougar Car Stereo Wire Diagram
Car Radio Battery Constant 12v+ Wire: Black/Orange
Car Radio Accessory Switched 12v+ Wire: Yellow/Black
Car Radio Ground Wire: Black/Light Green
Car Radio Illumination Wire: Light Green
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: Dark Blue
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: 5′ x 7′
Car Audio Front Speakers Location: Doors
Left Front Speaker Positive Wire (+): Orange/Light Green
Left Front Speaker Negative Wire (-): Light Blue/White
Right Front Speaker Positive Wire (+): White/Light Green
Right Front Speaker Negative Wire (-): Dark Green/Orange
Car Audio Rear Speakers Size: 5′ x 7′
Car Audio Rear Speakers Location: Side Panels
Left Rear Speaker Positive Wire (+): Pink/Light Green
Left Rear Speaker Negative Wire (-): Tan/Yellow
Right Rear Speaker Positive Wire (+): Pink/Light Blue
Right Rear Speaker Negative Wire (-): Brown/Pink

pls rate

When facing the router, Globe/Internet LED is on the right. Below are the LED indicators; Check the steps below:

Wireless Security - This light will only turn on if the wireless security is enabled.

Wireless-Computer Status - This light will turn on if a wireless computer is connected to the router.

Wired-computer Status - This light will turn on if a wired computer is connected to the router. Connect the wired computer to any gray port on the router. (There are 4 gray ports).

Router Status - Power light. Solid blue means the router is on and ready.

Modem Status - If this is off, it means the router is not connected to the modem. Make sure the cable is connected from the modem to the yellow port on the router.

Internet Status - This light will indicate if the router is connected to the internet.

If this is the first time you are installing the router, then what is important is to get the router, wired-computer and modem lights ON. Once they are on, you may insert the CD that came with the Belkin router to setup the internet connection and wireless settings.

Constant 12V+ Brown/White
Switched 12V+ Orange
Ground Black/Light Green
Illumination Pink/Black
Dimmer Pink
Front Speakers 5" x 7" Doors
Left Front (+) Gray/Blue
Left Front (-) Yellow/Blue
Right Front (+) Blue
Right Front (-) Yellow
Rear Speakers 5" x 7" Side Panels

Left Rear (+) Blue/White
Left Rear (-) Blue/White
Right Rear (+) Blue/Black
Right Rear (-) Red/Blue

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

they only light up once a ethernet cable is plugged in ( wired connection between appliance and the router ) does not when appliance is connecte wirelessly. if there is 5 open ports on the back of your router there should be 5 blank lights

Hi jackmyrtue,

Here's what the lights on the front indicate:


A. Wireless Security

• OFF Wireless security is off
• Solid Blue Wireless security is on

B. Wireless-Computer Status

• OFF Wireless computer is not present
• Solid Blue Wireless computer is connected to the Router
• Blinking Amber Problem with wireless computer onnecting properly to the Router

C. Wired-Computer Status

• OFF Wired computer is not present
• Solid Blue Wired computer is connected to the Router
• Blinking Amber Problem with wired computer connecting properly to the Router

D. Router/Power Status

• When you apply power to the Router or restart it, a short period of time elapses while the Router boots up. During this time, the "router" icon blinks.
• When the Router has completely booted up, the "router" icon becomes a solid light, indicating the Router is ready for use.
• OFF Router is off
• Blinking Blue Router is booting up
• Solid Blue Router is on and ready

E. Modem Status

• This icon lights in blue to indicate that your modem is connected properly to the Router.
• It turns amber when problem is detected.
• OFF Router is NOT connected to modem
• Solid Blue Router is connected to modem and functioning properly
• Blinking Amber Problem with modem

F. Internet Status
This unique icon shows you when the Router is connected to the

• Internet. When the light is off, the Router is NOT connected to the Internet.
• When the light is blinking amber, the Router is attempting to connect to the Internet.
• When the light is solid blue, the Router is connected to the Internet.

When using the "Disconnect after x minutes" feature, this icon becomes extremely useful in monitoring
the status of your Router’s connection.

• OFF Router is NOT connected to the Internet
• Blinking Amber Router is attempting to connect to the Internet
• Solid Blue Router is connected to the Internet

I hope this helps figure out your PS3 issue.

Thanks and don't forget to leave a rating.

Mark

Here is a wiring diagram of the radio by wire color:

Radio Constant 12V+ Wire: Green/Yellow
Radio Switched 12V+ Wire: Yellow/Black
Radio Ground Wire: Black/Green
Radio Illumination Wire: Light Blue/Red
Radio Dimmer Wire: n/a
Radio Antenna Trigger Wire: Blue
Radio Amp Trigger Wire: Blue (Same as Antenna Trigger)
Front Speakers Size and Location: 5′ x 7′ Doors
Left Front Speaker Wire (+): Orange/Light Green
Left Front Speaker Wire (-): Light Blue/White
Right Front Speaker Wire (+): White/Light Green
Right Front Speaker Wire (-): Dark Green/Orange
Rear Speakers SIze and Location: 5′ x 7′ Rear Deck
Left Rear Speaker Wire (+): Gray/Light Blue
Left Rear Speaker Wire (-): Tan/Yellow
Right Rear Speaker Wire (+): Orange/Red
Right Rear Speaker Wire (-): Brown/Pink
-->