Brother DCP-J125 unable print 73 - Brother DCP-J125

Description Fails to switch the cap lift cam positions. Causes Cap lift cam switch defective ASF encoder sensor defective ASF motor defective Main PCB defective

Hi
This is a mechanical problem of some description. Open the scanner cover and remove any foreign objects and paper scraps from inside the machine. Then, disconnect the machine from the power for several minutes and reconnect it. This should clear the error, but if it does not repeat the procedure making absolutely certain there is nothing in the printer obstructing the paper path.
You can get a manual for this machine here:
http://data.manualslib.com/pdf2/36/3557/355673-brother/dcpj125.pdf?5f68814c3d046699f5763ce9725a25e1
and there is a manual resetting procedure that you might try here:
Reset Methods for All Brother Printer Models
Hope this is helpful, if so would you please register that with Fixya
Cheers

Try One or More of These Options: Replace the maintenance unit,
Replace the ASF motor ASSY, Replace the main PCB

'unable to print 73' is a Printhead error..

Usually the printhead is an expensive part around $80 to $110, and you will need a full set of cartridges to prime the new printhead..

Sorry to say that this repair is not normally economical to go ahead with.

replace the printer head

Unable to init 48 brother mfc-J 415

why dcp j125 paper jam

unable to print init 50 brother

Brother DCP J125 unable to init.af help me please.