Multiple copy print - Xerox Phaser 7300DN Laser Printer

When my printer does this, it is almost out of ink. I don't know why, but it does. It's worth a shot to check.

I have used a HL-2140 for a long time without any problem printing multiple copies.
What kind of problem are you having printing multiple copies?

Change the port on the print driver to raw and check the print immediately button.

Hi,
The setting of quick print is as same as print. So you should check the print settings.
Click File->Print, in Copies Textbox, enter the number of copies.
Hope that help

when you open the driver of the printer there is a information how many copies do you want.it shows 1

This problem is caused by Mopier Mode being enabled by default. The idea of Mopier Mode is to minimise computer and network traffic by sending only 1 copy to a printer equiped with suitable internal memory. That stored copy is then used to produce the multiple copies. Most HP Laserjets do not have suitable internal memory and so only the one copy sent by the computer gets printed. To disable Mopier Mode:
Click Start
Click Devices and Printers
Right click your Laserjet Printer
Select Printer Properties
Click the Device Settings Tab
Scroll down to the bottom
If necessary, expand Installable Options
Click on Mopier Mode
Select Disable in the selection box that appears
Click Apply
You will now get multiple copies.

Windows may have eaten its baby again- that is, the driver for that printer.
Open the Control Panel, then Printers and Faxes, delete any listing for that model of printer, make sure the printer is on and connected, then reboot your system. This will force Win to 'find' the printer and install an uncorrupted driver for it.
(=Plug and Pray) 

if it's one original making 20 copies and doing the problem then you have a problem with the
a) Primary
b) Seperation unit

I would change the Sep 1st

On your Brother's drop- down menu, left click on PRINTING PREFERENCES . On the BASIC tab, choose the number of prints in the COPIES box, then left click on APPLY. If that does not work, go into PROPERTIES, left click on the SECURITY tab, and check that you have authorization to run multiple prints. Also, check your PRINT SPOOLING mode to make sure it is activated, and check authorizations in OFFICE 2007- it may be set to restrict multiple color pints.

Dose it do it when you use it as just a copier? I would have to say that the problem lies with in your network some where. Call your IT person.....