My top load washer stops after the rinse cycle. It does not make any noise, it just does not spin and then it will not drain either. I do hear a "click" when I put the lid down. Model number is 20892990. Please help!
BAD LID SWITCH-MIKE
BAD LID SWITCH-MIKE
unplug washer,remove the console head screws,1 on each side,flip the head up,you will see the lid switch jack,unplug it,cut the 2 outside wires and wires them together,plug the switch back in the jack,screw head back,you have now by passed the switch and all should work,plug in and test-mike
please change your rating to a fixya as i have emailed the fixya repair to you,thanks-mike
you give me a thanks for trying then ask me to fix it for you again,what up with that?????????????
×
988 views
Usually answered in minutes!
The washer is currently full w/ water. Can I fix the lid switch with water still in it? If not, how do I get the water out??
Model number is 20892990. It's a top load series 80 Kenmore. It's not spinning anymore. When you push the start button, you can hear what I think is the motor spinning, making a ratcheting sound but nothing else happens. I'm thinking there's something wrong with the transmition. If so how can I fix it? Can I replace a gear inside?
×