Srp-350 thermal no printout - Samsung SRP 350 Thermal Printer

You should be able to right-click and change setting to online status. Our not, contact manufacturer.

itecghana, printing slow is probably an issue of the interface type (serial, parallel, usb, ethernet...) and not the printer itself. The Bixolon 350 has a self test printout capability (turn on printer while holding down the feed button) which'll demonstrate the print speed capability of the printer.
My guess is you have a serial interface (COM port), serial is notoriously slow when printing via any windows driver.
If the printer you have is a 350, one solution is to change the interface card on the printer from Serial to USB. The part number of the USB interface card is IFA-U Type, can buy one for about 35 bucks online.

Please get the correct driver here : www.printcountry.com/drivers.asp
www.opendrivers.com/.../printers-free-driver-download.html
www.driversdown.com/driverslist/r_4_1.shtml
Regards, Jay__hcy72s4

If it's a thermal printer, it doesn't use toner, just thermal printer paper (Like fax paper), It's a paper that turns black on heat contact. It doesn't require any ink.

pls set print margin.

Hi Anabel,
I've heard of this kinds of issue in cases where an adaptor cable (usb-serial, usb-parallel) causes this. But if this isnt you perhaps you can try reloading the printer's newest driver.

This was originally a Samsung printer, and they had plans to release a Linux driver. However after some corporate games it's now owned by Bixolon, and everything Linux has been axed.

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-fareast-font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Please reference the user’s manual on page 11 and 12 for dip switch settings.

On this link; http://www.samsungminiprinters.com/support/Drivers.asp About half way down are all the drivers/firmware available for your printer (version 3.1.5) Hope this helps - please post again if you need more info :)

I have a samsung printer srp-350pg, it is printing garbiches, I download a driver does the samething, used generic driver but nothing changed

Please help