Jet 3 Ultra Power Chair Logo

Related Topics:

Posted on Feb 26, 2009

WHAT MAKES THE CHAIR NOT MOVE WHEN CHARGING?

I WANT TO MAKE THE CHAIR SOLAR POWER . BUT THE CHAIR HAS
A SAFETY SWITCH WHEN CHARGING THAT WON'T LET IT MOVE. HOW DO I MAKE IT MOVE WHILE CHARGING?

  • Anonymous May 11, 2010

    All chairs are different, I would have to know your Chair Name, but you could also call the company for which your chair was made from if its Quatum- it would be Quatum Rehab, or if you got the chair thru a Specialist, ask the specialist what makes it not move while charging it, They might be able to help, if you explain what you wnat to do. I've never heard of a Solar Powered Wheelchair with a standard wheelchair, only ones that have been built that way.

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Governor:

An expert whose answer got voted for 20 times.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 11 Answers
  • Posted on Mar 30, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Governor:

An expert whose answer got voted for 20 times.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Mar 28, 2009
Answers
11
Questions
1
Helped
9209
Points
31

You cannot make a powerchair operate while it is charging. For safety purposes the power cuts out when charging batts. The only power is going to the batteries.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

Travelux powerchair. How do I change the height of the seat

Hi:
The Travelux power chair seat raises and lowers with the height adjust switch. The switch will only work if the chair is stationary, and the chair will only move if the seat is lowered all the way , for safety reasons
Nov 02, 2017 • Motorcycles
0helpful
1answer

Chair won't move..lights flash continuously

You may have locked it by holding the power button . try turning it on then hit thee horn 2 times . That should unlock it.
0helpful
1answer

My vision sport power chair won't move. the

says here thats a right motor fault, check the right motor connections and cableing
0helpful
1answer

Jazzy 1107 power chair won't move

3 flashes indicate that there is a short circuit to the left motor and battery connection. Check wiring and connections
0helpful
1answer

Shoprider power chair won't move and 8 Battery LED Lights are flashing

Code 8: Controller problem. Also, check to see if your gearbox levers are engaged - if you can roll the chair by hand the gearbox is not engaging the motors.
0helpful
1answer

Jet 3 ultra power chair won't move

Move the freewheel levers back and forth so the chair does not move drive position

I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489

0helpful
1answer

Just replaced batteries and unit is operating good since i installed the battteries and i try to put on charger it says it is in the charge inhibit mode that is according to the flashing lights what does...

All that eans is that when you are charging the batteries you are unable to drive the chair. Its a safety feature to ensure that you won't accidently make the chair move with the charger plugged in. Just plug the charger into the charger port turn off the chair and then plug the charger into the wall charge overnight and in the morning unplug the charger from the wall and then from the joystick. Always have the charger off when plugging ang unplugging from the chair. With the M41 charger get a power strip with an on/off switch plug the charger into the strip and use the on/off switch to turn the charger on and off before you plug it into the chair Hope this helps you
0helpful
1answer

When turning power it makes a clicking sound but does not power up. battery charger has a red and green light on. When plugged in and turned on it flashes 8 times. I checked the power control connection,...

The chair will not move if the charger is plugged in. The flashes are normal with the charger plugged into the chair. The lights on the charger mean that the batteries have been fully charged. Red and yellow lights mean charging. After you unplug the charger from the chair (if off-baord charger, turn charger off or unplug from the wall) then unplug from joystick. after plug is removed from joystick press the on button and all the battery lights should be lit and when you move the joystick forward you will hear the electric bake release and the chair should move forward etc Hope this helps
0helpful
2answers

I have a trace inverter DR 1512, I am having a problem with my system, which includes a 5000 watt gen, and solar power. When I am dry docked and have solar, system functions fine, when I lose solar and go...

the solar panel is just to charge your inverter,if it is charging and the inverter is on it will drain the current the solar panel is supplying to the batteries,this makes it look like it is not charging ,so i advice you to switch off you inverter when charging it,get another set of batteries connected to your solar panel then charge both, let them be separated so that the new one is not in use so that when solar is out you can switch to the other set of batteries
Not finding what you are looking for?

347 views

Ask a Question

Usually answered in minutes!

Top Jet Health & Beauty Experts

ADMIN Eric
ADMIN Eric

Level 3 Expert

39378 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66915 Answers

Are you a Jet Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...