Hi,
when you boot the server there is a menu that comes up before the bios screen, enter that menu there you can know which raid level is being used.
Further Queries are welcome
Hi,
sorry to disappoint you but in Raid-0 failure of one drive means that you cannot recover the data, as all the data is stripped into multiple drive, here is a link it can tell you in detail about raid-0
http://www.m-techlaptops.com/raid.htm
another hepfull article regarding this
http://en.wikipedia.org/wiki/Redundant_a...
here is a helpfull article about using different size drives in raid 0
http://www.tomshardware.com/forum/192255...
Further Queries are welcome
×
169 views
Usually answered in minutes!
thanks alot itoso well i had done that and i find it's raid 0 but whta i have to do. i try to buy the new hdd for the raid as my primary drive fail but it's not available in the market.
the scenario is in my raid i have 3 seagate 73 GB 10 K HDD but in the market i can only get 146GB 15K hdd, is there any problem i can put one 146GB 15K HDD and Two 73 GB 10K and recover my data
×