Solid red light on R1500 rackmount UPS

Google the manual for the camera.

make model manual

Impossible to guess what you have!

Power fluctuations
https://www.askmefast.com/MY_DSTV_DSD_3U_DECODER_IS_DISPLAYING_ONLY_ORANGE_STEADY_LIGHT-qna9330642.html

Or it might be dad service, or downloading new software

[Responded] Poor service / Decoder software removed ' DStv ...

www.hellopeter.com > dstv-multichoice > reviews > po...

Mar 14, 2018 - However, the problem escalated now whereby my DSD 3U DSTV decoder suddenly switched off and only display an amber light in the middle ...

Gotv decoder showing a yellow / Orange light constantly

myofflinestash.com > index.php > gotv-decoder-showi...

Solid Red This means that the decoder is in StandBy Mode, this is similar to a computer being put in sleep mode. · Solid Amber This state of the decoder means ...

Quick Guide - DStv

cdn.dstv.com > selfservice > documentation

PDF The moment you connect your DStv HD Decoder, is the moment your TV viewing experience will become ... Solid AMBER = decoder is downloading software.
..

You can Google the brand and model number for a free owner manual but on the set indicated it means usually the lamp is the issue.

you can get the parts for tvs over 10 years old and under, i dont know what he means as video box as there is main av board and t-con board, main av is the logic board for all inputs and t-con is video converter for the screen. solid red light usually means power board failed, blinking is usually not enough voltage to startup or boot up.

Hello, you can download the manual here: http://www.plantronics.com/us/media/media-resources/literature/user_guides/73156-01_CS55_US_DL.pdf?WT.dl=20 It says that a flashing amber light means charging, a solid amber light means charged, a solid red light means power, a solid green light means talking, and a blinking green light means muted.

red light is stands for hardware boot and the green one is stands for system boot and disc boot. when red light remains solid it means your system is in 0% cpu usage and nothing doing, stop working

LED Indicators - LaCie 2big Network
The LED indicators above the drive bays and the front LED indicate drive status and activity.
During Startup

• Front LED – blinks red/blue until both disks are powered on, then turns solid blue.
• Rear LEDs – blinks red/blue until corresponding disk is powered on, then turns solid blue.

NOTE: If the device is not able to initiate the boot process following disk startup, the front is solid red.
During Bootup

• Front LED – solid blue
• Rear LEDs – solid blue

NOTE: If a disk is failing, both the disk’s corresponding rear LED and the front LED will be solid red.
During RAID Synchronization

• Front LED – solid red
• Rear LEDs – The LED corresponding to the original disk will be blinking blue and the one being synchronized is blinking red
• Once both disks are synchronized, their corresponding rear LED and the front LED will be solid blue.

According to the manual I have, that is a site wiring fault. It means that there is no ground on your AC line coming into the unit.
If you e-mail me, I will send you the pdf of the manual.
Dave
[email protected]

did you get this fixed

The middle light is the light for internet services. If it is flashing that means its looking for a dsl signal, if its solid orange that means it needs authentication information (IE: username/password entered into it) and if its solid red that means you have no signal at all. What I would recommend is first check all the phones/alarms/satelite dish systems in your house and make sure they all have dsl filters on them before plugging into the wall, since this will cause an intermittent dsl connection. If everything is fine then call your Internet Provider and have them do some line tests for you to see if the service is having problems.