Automated Attendent How do I change the Automated Attendent greeting? I have inherited this Norstar System with voice mail and there are no manuals for it.

Question 1

0helpful

1answer

Hi there, We have lost our manual for our kx-t7630 phone system, and we need to change the main greeting you get when you call in on the phone line??? Does anyone know??? Thanks!

I know...on the ones I install. Your Panasonic dealer has a set of instructions, and the special instructions that laid out the Automated attendant portion of your Voice Mail system. There's a chance that he has remote maintenance and can log into your sytem and give you the special custom greeting number and procedure to change all greetings.

Carl

Dec 02, 2010 • Panasonic KX-T7630 Corded Phone

0helpful

2answers

Toggling between greeting 1 and greeting 2

Hi, what do you want to change? What feature is programmed on the button?

"EACH OF THESE CODES ARE PRECEDED WITH THE ""FEATURE" " KEY"

**CONFIG NORSTAR CONFIGURATION PROGRAMMING (INSTALLER)
**SCPLUS NORSTAR SYSTEM COORDINATOR PLUS PROGRAMMING
(CICS AND ICS 2.0+)
**ADMIN NORSTAR ADMINISTRATIVE PROGRAMMING (SYS Coordinator)
**BASIC NORSTAR BASIC PROGRAMMING (CICS & ICS S.0+)
**SET NORSTAR SET PROFILE
**LINE NORSTAR LINE PROFILE
**USER NORSTAR USER PREFERENCES (CICS & ISC 2.0+)
**TIME NORSTAR TIME AND DATE (CICS & ICS 2.0+)
*0 BUTTON INQUIRY
*1 FEATURE KEY EXTERNAL AUTODIAL
*2 FEATURE KEY INTERNAL AUTODIAL
*3 FEATURE KEY PROGRAMMING
*4 PERSONNEL SPEED DIAL
*501 SELECT ENGLISH
*502 SELECT FRENCH
*503 SELECT SPANISH
*6 RING TYPE
*7 DISPLAY CONTRAST ADJUST
*80 RING VOLUME ADJUST
*81 MOVE LINE KEYS
*82 DIAL MODES
*831 AA ON/OFF (CICS)
*832 CCR ON/OFF (CICS)
*833 AA/CCR RECORDING MAINTENANCE (CICS)
*84 AUTO LOG OPTIONS
*85 CALL LOG PASSWORD
*89 PROGRAMMED RELEASE
*9 RUN/STOP
0 SYSTEM SPEED DIAL
1 SEND MESSAGE
#1 SEND MESSAGE CANCEL
2 RING AGAIN
#2 RING AGAIN CANCEL
3 CONFERENCE / TRANSFER
#3 CONFERENCE SPLIT
4 CALL FORWARD
#4 CALL FORWARD CANCEL
5 LAST NUMBER REDIAL
60 PAGE GENERAL
61X PAGE INTERNAL ZONE (1-6)
62 PAGE EXTERNAL
63X PAGE INTERNAL ZONE (1-6) PLUS EXTERNAL
64 LINE POOLS
65 MESSAGE REPLY
#65 MESSAGE REPLY CANCEL
66 VOICE CALL
67 SAVED NUMBER
68 RESTRICTION /COS OVERRIDE
69 PRIORITY CALL
70 CALL TRANSFER (BLIND)
71 LINK (HOOK FLASH)
72 TIMED RELEASE
74 CALL PARK
75 GROUP CALL PICKUP
76 DIRECTED CALL PICKUP
77 CALL DURATION TIMER
78 PAUSE
79 EXCLUSIVE HOLD
800 TRUNK ANSWER
801 CALL QUEUING
802 GROUP LISTENING
803 SHOW TIME
804 WAIT FOR DIAL TONE
805 TEST SETS (2.0)
806 HIDE DISPLAY
808 LONG TONES
810 MAKE BUSY
811 CALL INFORMATION
812 ENTER CALL LOG
813 LOG IT
815 AUTO BUMPING
817 IRAD TRANSFER (CICS ONLY)
819 OUTGOING NAME AND NUMBER BLOCKING (4.1)
#819 CANCEL OUTGOING NAME AND NUMBER BLOCKING
82 CAMP ON
83 PRIVACY CONTROL
84 LINE REDIRECTON
#84 CANCEL LINE REDIRECTION
85 DO NOT DISTURB
#85 CANCEL DO NOT DISTURB
86 BACK GROUND MUSIC
#86 CANCEL BACKGROUND MUSIC
87 "SERVICE MODES (DR-3,4,5)"
#87 CANCEL SERVICE MODES
870 SHOW SERVICE MODES (CICS)
871 EXTENDED RINGING (ICS)
#871 CANCEL EXTENDED RINGING
872 ALTERNATIVE RESTRICTIONS
#872 CANCEL ALTERNATIVE RESTRICTIONS
873 ALTERNATIVE ROUTING
#873 CANCEL ALTERNATIVE ROUTING
88 VOICE CALL DENY
#88 CANCEL VOICE CALL DENY

FEATURE 900 CODES ARE USED FOR OPTIONAL EQUIPMENT SUCH AS:
"VOICE MAIL, ACD, DIAL BY NAME, DOOR PHONE, ETC."
THE FOLLOWING ARE SOME COMMON USAGES:
9** "RAD PROGRAMMING (RAD 2, FASTRAD)"
9*0 RAD TRANSFER (ALL BUT CICS IRAD'S)
9*1 CHECK FEATURE CODES FOR VOICE MAIL
9*2 SMDR Admin
9*3 LOGGER TIME STAMP
9*3 VMI Codes(this was on an 8x24, came up on this code rather than F9*9)
9*4 NORSTAR DOOR PHONE PROGRAMMING
9*5 FLASH LOW RANGE CHECK FEATURE CODES
9*7 ACD ADMIN MAINTENANCE SESSION
9*9 VOICE MAIL INTERFACE (VMI) CODES
900 SMDR,enter an account number to be logged with the call
901 ACD LOGIN
901 VMI Admin
902 ACD UNAVAILABLE
903 VOICE MAIL HIGH/LOW RANGE SELECTION (DISABLED AFTER USE)
903 ACD CANCEL WRAP
904 ACD HELP
904 FLASH ACD LOW RANGE LOGIN/OUT
905 ACD CATEGORIZE
905 FLASH LOW RANGE DN IDENTIFIER
906 ACD RECORD CALL
906 FLASH LOW RANGE VM TRANSFER
907 FLASH LOW RANGE VM INTERRUPT
908 STAR TEXT (OBSOLETE)
908 FLASH ACD LOW RANGE BUSY MODE
909 ACD ANN. MAINTENANCE
909 FLASH ACD LOW RANGE QUEUE STATUS
910 FLASH LOW RANGE LEAVE MESSAGE
911 FLASH LOW RANGE OPEN MAILBOX
912 FLASH LOW RANGE OPERATOR CONTROL
913 ACD CALLS QUEUED
913 FLASH LOW RANGE SYSTEM ADMIN LOGIN
915 NORSTAR VOICE MAIL 2ND LEVEL ACCESS (PSWD=ACCESS2)
920 ACD ADMIN SESSION
921 ACD ROUTING SESSION DAY/NIGHT
922 ACD ADMIN STATISTICS SESSION
923 ACD GROUP STATISTICS SESSION
960 DIAL BY NAME (CINTECH NSVM OPTION)
961 DIAL BY NAME ADMIN (PSWD=1234)
980 VM SEND MSG TO ANOTHER MAILBOX
981 VM LOG INT MAILBOX
982 VM OPERATOR STATUS(PSWD=OPERATOR(67372867))
983 VM ADMIN PROGRAMMING (PSWD=1020000)
983 VM SOFTWARE LEVEL(LOGIN THEN OPTION 9)
984 VM TIME AND DATE(STARTALK Pswd=1020000)
984 AUTO FOREWARD TO VMAIL(NSVM4.0)
984 FLASH ACD LOGIN/OUT
985 "VOICE MAIL DN INQUIRY(RESET VM ADMIN PSWD 9,73738767793)"
986 VOICE MAIL TRANSFER
987 VOICE MAIL INTERRUPT
988 VOICE ACTIVATED NAME DIALING (NSVM 4.0)
988 FLASH ACD BUSY MODE
989 RECORD CALL (NSVM 4.0)
989 FLASH ACD QUEUE STATUS

Mar 11, 2010 • NorStar M7310 Corded Phone

1helpful

1answer

I have a Norstar T7316E phone system. I need to

Depending on the type of voicemail you have It can be accomplished by calling in to the office and when the main greeting starts playing press **, the administrator mailbox number, the password and the pound key (the administrator password must be changed from 0000). Once in the mailbox press either 9 or 99 at this point you can re record the main greeting.

Feb 24, 2010 • NorStar T7316E Corded Phone

0helpful

1answer

Just bought a business with Norstar VM system. All calls still go to their old vm message even though I've changed the message on every phone we have. How do I override or change the old voice mail message...

you need to change the greeting in the main menu you will find this in feature 983.under greeting and tale you will find the old ones...

Jan 18, 2010 • NorStar Startalk Flash 2 Phone

0helpful

2answers

System inactivated inadvertently

Reboot voice mail system hopefully it will come back wait a good five minutes before trying

Nov 17, 2009 • NorStar M7310 Corded Phone

0helpful

1answer

How do i retrieve calls on my nortel norstar telephone from my home phone?

To access your voice mail remotely, while a greeting is playing (either the mail greeting or your own mail box greeting) press ** followed by your mail box number, password followed by the # ( ex. **,221,1234,#).

Oct 20, 2009 • NorStar T7208 Corded Phone

1helpful

1answer

AVAYA PARTNER ACS PHONE SYSTEM

Yes it can. Depending on the type of voice mail attached to your system you can both have the lines answered with a seperate main greeting (partner messaging can do this) or answered by a seperate mailbox (all partner voice mails).

Oct 06, 2009 • Lands Phones

9helpful

1answer

Change voice message on nortel meridian phone system

You need to go in to voice mail admin .
Feature 983 1020000
press AA
press Greeting
press greeting again
enter 1 for greeting 1
this should be your main greeting it could any greeting from 1- 20 , it depends on how it was set up but that should work fine .

Feb 17, 2009 • Nortel Norstar 16-Line PBX Speakerphone

0helpful

1answer

I cannot change the voice mail to pick up the primary greeting

check on line just type in norstar mail they are everywhere..

Jan 06, 2009 • NorStar T7316E Corded Phone

0helpful

1answer

Changing auto attendant's voice to be my own.

GBSA: Depending on which auto attendent you have, which is
an add on device to your phone system, you will either have to go to the actual unit and access it via a jack, some have built in CD mikes and re-record the message. The newer units have an access code that you dial from your extension unit allowing you to make the change from there. Thank You. Jerry

Nov 26, 2007 • NorStar Meridian M7310 Phone

Question 2

Anonymous

Expert 192 Answers
Posted on Mar 19, 2009

Anonymous

Expert

Joined: Mar 19, 2009

Answers

192

Questions

4

Helped

239374

Points

557

Norstar Voicemail for 6.0 or less
Programming must be done from any M7310, T7316, or M7324 model phone set.

***************************************************************************************************
To Log Into System Administration:
1. Enter Feature 983
2. The display will show "LOG:", enter your login password
a. If your company extensions are 2 digits long enter "120000"
b. If your company extensions are 3 digits long enter "1020000"
c. If your company extensions are 4 digits long enter "10020000"
3. Press the softkey under "OK"
***************************************************************************************************
To Record the Company DAY & NIGHTGreetings:
1. Press AA
2. Press GRTG
3. Press GRTG
4. <Display> Greeting:
5. Enter 1 for DAY Greeting --- Enter 2 for NIGHT greeting
6. Press OK
7. Press REC to record.

Related Topics:

Automated Attendent How do I change the Automated Attendent greeting? I have inherited this Norstar System with voice mail and there are no manuals for it.

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Hi there, We have lost our manual for our kx-t7630 phone system, and we need to change the main greeting you get when you call in on the phone line??? Does anyone know??? Thanks!

Toggling between greeting 1 and greeting 2

I have a Norstar T7316E phone system. I need to

Just bought a business with Norstar VM system. All calls still go to their old vm message even though I've changed the message on every phone we have. How do I override or change the old voice mail message...

System inactivated inadvertently

How do i retrieve calls on my nortel norstar telephone from my home phone?

AVAYA PARTNER ACS PHONE SYSTEM

Change voice message on nortel meridian phone system

I cannot change the voice mail to pick up the primary greeting

Changing auto attendant's voice to be my own.

Not finding what you are looking for?

M7310 Phone

Hi there, We have lost our manual for our kx-t7630 phone system, and we need to change the main greeting you get when you call in on the phone line??? Does anyone know??? Thanks!

Ask a Question

Top NorStar Lands Phones Experts

Cindy Wells

Paul Bade

Daniel Blask

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

Automated Attendent How do I change the Automated Attendent greeting? I have inherited this Norstar System with voice mail and there are no manuals for it.

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Hi there, We have lost our manual for our kx-t7630 phone system, and we need to change the main greeting you get when you call in on the phone line??? Does anyone know??? Thanks!

Toggling between greeting 1 and greeting 2

I have a Norstar T7316E phone system. I need to

Just bought a business with Norstar VM system. All calls still go to their old vm message even though I've changed the message on every phone we have. How do I override or change the old voice mail message...

System inactivated inadvertently

How do i retrieve calls on my nortel norstar telephone from my home phone?

AVAYA PARTNER ACS PHONE SYSTEM

Change voice message on nortel meridian phone system

I cannot change the voice mail to pick up the primary greeting

Changing auto attendant's voice to be my own.

Not finding what you are looking for?

M7310 Phone

Hi there, We have lost our manual for our kx-t7630 phone system, and we need to change the main greeting you get when you call in on the phone line??? Does anyone know??? Thanks!

Related Topics

Ask a Question

Popular Questions

How do i set up a voice mail greeting on my nortel phone?

How do I turn off the ringer on a Nortel T7316E?

Template for T7316 Phones

How to disable do not disturb from Nortel phone

Nortel T7316E

Top NorStar Lands Phones Experts

Cindy Wells

Paul Bade

Daniel Blask

Are you a NorStar Lands Phone Expert? Answer questions, earn points and help others

Manuals & User Guides