Canon MP160 Printer "Ink Absorber is Full - Canon PIXMA MP160 All-In-One InkJet Printer

Clive

• 4362 Answers
• Posted on Feb 20, 2010

SOURCE: Canon pixma 150 waste ink absorber full

Hi there
You can try to reset the cartages this may do it Please call back let us know if it worked for you, PLEASE.

But some time when you get the chance do clean the waste tank out.
　

1. Start with printer off


2. Press and hold resume Button (triangle in the circle) and click "Power" button. Green led should be on


3. While holding the Power button, release the Resume Button.


4. Without releasing the Power Button, click "Resume" button for two times and release Both Buttons.


5. Click "Resume" for four times then soon click "Power" button, to confirm the selected action (reset counter absorber).


6. Turn off the printer and turn on again

SOURCE: canon printer mp160 e27

E27 Waste ink absorber full or platen waste ink absorber full please chek it

SOURCE: Ink Absorber Full

The first is to disassemble the printer to gain access to the waste ink resevoir and replace or wash out, rinse and dry the old felt pads. The second part, after everything is reassembled is to reset the internal counter that determines when the ink absorber is "full". This is usually done by pressing a combination and sequence of buttons on the panel. One of the best sites is FixYourOwnPrinter.com for information on a large variety of printers including reset sequences.

Tareq Bin Mostaq Mostaq

• 1449 Answers
• Posted on Sep 06, 2009

SOURCE: canon pixma mp160 ink absorber is full

this the reset wast ink please follow it step by step

SOURCE: Canon MP140 series printer-USB001 ink absorber is full

Please send it to your nearest service centre.