Vs-70707 dark on power up

I know who answered the other question, do you want to attempt the hard reset for this model?

Very simple , you need to initialize you tv by pressing menu and input bottoms at the same time for 30 seconds until the picture coming up and select * intitialize* on the screen menu, and wait until is done and you done.

I know, me too! come on' people, help!:(

This board are no longer in the market.Try website like Tvrepairworld.com might have a rebuild one.It part main board parts of the power unit.

Direct quote from 2001 Mitsubishi Product Catalog Specs. Gold Series

VS-70707

Weight (approx. lbs.) 365

goto your menu and turn closed caption off, its probably set to 'text1. let me know if this corrects it

Good day, crsomers1;
The 'giggling' may be a horizontal problem, also known as pie crusting. Try this first: unplug TV from wall, reset or reboot. Secondly: CHECK C2P05 100 UFD 16 V OFF PIN 3 OF IC2P01 (9-VOLT REGULATOR) ON THE SIGNAL PCB.
I hope this was helpful, good luck, big IRISH.

Good day, ecklers;
Try these locations and sights:
Mitsubishi's External Site Address
www.mitsubishi-tv.com

Part Orders
Phone 9:00AM - 6:00PM EST ...... (800)553-7278
FAX (24HRS) Toll Free .......... (800)825-6655
[email protected]

Technical Assistance
Audio/Video Products
Phone 9:00AM - 6:00PM EST
Authorized Servicers ............(800)552-8324
FAX (24HRS) .....................(706)654-4299
[email protected]

Consumer Relations
Consumer Issues
Phone 7:00AM - 5:00PM PST ......(800)332-2119
Dealer or Servicer Referral(24HRS)..(800)332-2119
FAX (24HRS).........................(949)465-6147
FAX Document Retrieval System(24HRS).(800)332-2119
Ihope this was helpful,big IRISH.

Its definately fixable. Can you post a picture of what your refering to when you say horizontal lines and jumping? Also do you have any soldering ability or troubleshooting experience? Let me know

Do you know if this is what the problem is? If its color problems or convergence alignment then:1. THE CONVERGENCE CAN BE RESET BY PRESSING "MENU 12596" TO ENTER THE CONV MISC. MENU THEN "8970" TO RESET.