- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your floppy disk drive may be defective. Also, Some floppy drives are manufactured differently. Your best bet is to find another floppy drive to read your floppy disk. You can try to take it to the nearest computer store and ask them to read it for you. If they can read it at the computer store? The Sabrent drive you received if bad. If they cannot read it the floppy is bad. If the floppy is bad you can try to download free data recovery software to attempt to recover your data, files etc. Good luck
Did you format the disk using NTFS? Have you loaded the software that came with the drive? Once the software is loaded it will take you thu the steps to set it up properly
dynex puts out a usb to serial adapter can be bought at best buy for somewhere around 15.00 you will need the drivers from the cd to make it work and then will probably have to set the port it is looking for that should be all you need
I checked the sabrent website and didn't find it listed there. If the disk doesn't seem to have drivers for it then I would do one of 2 things
1. contact sabrent from their websites contact us www.sabrent.com
2. check places like driversguide.com and other driver storage sites for your drivers
×