Unsure of audio setting using Onkyo TX-SR606 connected to PS3

Hi Jay Gibson, to be able to send audio from your Panasonic SA-AK110 to the Onkyo TX-SR606, you must use the Panasonic headphone output Connecting a cable with a 3.5 mm stereo mini plug at one end and two RCA at the other
The miniplug to the headphone output, you connect the miniplug and the two RCAs to the Onkio CD input
I suggest you have the volume of the Panasonic at an average level or less, so as not to saturate the Onkio's input
I hope you can hear it
Greetings Franco Dosil

Hola Jay Gibson, para poder enviar audio desde tu Panasonic SA-AK110 al Onkyo TX-SR606, deberas usar la salida de auriculares del Panasonic Conectando un cable con miniplug estereo de 3,5 mm en un extremo y dos RCA en el otro
El miniplug a la salida de auriculares, conectas el miniplug y los dos RCA a la entrada de CD del Onkio
Te sugiero que tengas el volumen del Panasonic en un nivel medio o menos, para no saturar la entrada del Onkio
Espero que lo puedas escuchar
Saludos Franco Dosil

I think this one is for the Onkyo wizards:

I would write them via email here:

http://www.onkyousa.com/feedback_form.cfm

1-800-229-1687
However I did find this 2 page hookup manual with nice notes at link listed below that may help you solve the mystery:

(seems you may have to assign the digital input)

http://filedepot.onkyousa.com/Files/QuickHookup/TX-SR606_QSS_En_A.pdf?CFID=918117&CFTOKEN=40624545&jsessionid=f0306ea8a0d68bb60a49102e3e5510576756


Assigning the Digital Input
If there’s no sound, you’ll need to assign the digital inputs as
necessary using the setup menus on the TX-SR606’s display.
If you connect your DVD player to the AV receiver’s COAXIAL 1
DIGITAL IN, and your cable/satellite receiver to the COAXIAL 2
DIGITAL IN, as shown, it’s not necessary to assign the digital input.
The onscreen setup menus appear only on a TV that is
connected to the HDMI OUT. If your TV is connected to the composite video or S-Video MONITOR OUT, or the
COMPONENT VIDEO OUT, use the TX-SR606’s display when changing settings.

Thanks for using FixYa!

Kelly

you cannot control a ps3 with that remote because the playstation 3 only works with bluetooth. I'm sorry to have to tell you. you can purchase a remote that works with your system at any that sells your system.

hope this helped
please rate well.

If you need further help, reach me via phone at https://www.6ya.com/expert/mark_445a24324be9eb03

you may want to try changing the aspect ratio on the HD box and the DVD as opposed to the receiver. This should do the thing

Not sure if this is your fix, but I had what I thought was the same problem. I played with my Onkyo quite a bit ensuring the correct assignments for HDMI, audio and all that stuff. Turns out I neglected to make sure the output devices were properly assigned. Many devices aren't default to output sound over HDMI. I changed the audio out settings on the cable box to HDMI and suddenly the Onkyo worked great. I know, I'm an idiot for not checking that in the first place, but maybe someone out there is having the same trouble as well.

If you're running an optical cable from the PS3 to the receiver, best quality would be through the Dolby Digital, because that broadcasts in 7.1 HD Audio Format. There should be a way to get a default setting when the optical input is detected in your receiver.

DTS-HDMA and Dolby TrueHD cannot be passed to your receiver via bitstream on the PS3. DTS-HDMA cannot be decoded either so you're out of luck there.
Dolby TrueHD can be decoded internally on the PS3 assuming your firmware is up to date. Set the Blu-ray HDMI output to PCM and you can then pass it to your receiver.
If this doesnt work, do a system update on your PS3.

alot of times , you need to go into the bluray menue under audio, and make sure audio output is set to hdmi, and not componant

See www.avforums.com/forums/onkyo-owners-forum/696423-faq-setting-up-ps3-onkyo-amp.html

This should give you the info to set up the ps3.

Hi there. for your receiver, the only time it can upconvert is when you go out as HDMI. In your current hookup (component out to tv) the signal from your cable (using a composite) will not be able to pass through the component cable. This means you either have to hook up your cable box using a component cable as well or add a composite cable (yellow) from monitor out of the receiver to the tv. Page 22 of the manual will show a diagram of the video signal flow. hope this helps.. ^_^