ATT says it doesn't block ports and the SpeedStream 5100 adsl modem they provided shouldn't be blocking any ports. Yet I cannot get my new Airport Extreme to port forward the cameras ip so I can view them wirelessly. So either the Speedstream or the Airport Extreme is blocking ports.
SOURCE: need to telnet or web into speedstream 5360 modem
I believe the default IP address for those is 192.168.254.254 and the login and password are both admin. If that address doesn't get you to the login screen, do the following.
1. Go to start>run
2. Type cmd and hit enter
3. Type ipconfig
4. Write down the default gateway address
5. Type that address into your web browser and see if it connects to the gui now.
If that doesn't help let me know and I'll keep digging for the manual but wow is it hard to find anything about it online.
Jill
SOURCE: cant get speedstream modem into
Hi I was in a live session with you earlier. Seems like you lost contact after restarting your router. Any luck?
SOURCE: Hello, I am the office
Thank you for using FixYa
I am going to attempt and I say attempt to give you a solution. After much research I find that this issue has come up before since about 2003 on those series of modems. I found one solid reference that solved the issue. Their solution was to set the modem to Bridge and do the port fowarding in the Linksys router. I do not know if this will help you in your setup but it is at least worth the suggestion. I am sure your Speedstream is out of warranty by now and you are unable to get back to the supplier, who may have other suggestions. Those modems have come through an evolution of updates as you might have guessed and the solution may be getting another kind.
I hope this was useful and please comment if this was helpful to you.
144 views
Usually answered in minutes!
×