I have two dual flush toilets - a Kohler and the Aquia II. On the Kohler, I push the button and away it goes. On the Toto, I have to depress the button and hold it down for a second or two for it to flush. Is that normal for the toilet, or do I have a defect?
TIA!
I had the same problem. The fix cost me 50 cents (literally). I just placed a quarter on top of the Blue and White flush buttons (not sure of the technical terms) inside the tank and now it flushes properly. It seems that the 2 plastic poles the extend from the faux chrome buttons are just a bit too short.
Hope this helps
I had the same problem with mine and I lifted the tank lid off and
extended the rods they are threaded and turned them out a few turns and returned the lid back on and no more holding down the buttons
This worked for me too, although I had to play with the exact length to get it so that I didn't have to hold the buttons down AND the water did not continuously keep flowing in.
×
Button 1 for pee.Button 2 for poo.If you remove the tank lid you can watch how a dual flush works.When you press button 1 quickly it only empties half the tank.The sound it makes sounds like it didn\'t flush properly and people tend to hold button 1 down longer.When you hold button one down longer it empties the whole tank,which is wrong for just pee.You only need to empty half the tank for pee.No matter which way you push button 2,quickly or longer,it empties the tank either way.Pressing either button quickly is the proper way to flush.
11,511 views
Usually answered in minutes!
same problem. Must be a feature not a defect.
Not much of a feature, if you hold it down for too long it emptys the while tank
×