Everest esf1 error 3

Yes, it does exist,. It is a commercial reach-in refrigerator.

ESR1 ' Everest Refrigeration

everestref.com > product > esr1
Description. Everest's Upright Top Mounted Reach-In Series offers an outstanding combination of refrigerator, freezer, and dual temperature options as well as full ...

Everest Refrigeration ESR1 29-1/4" One Section Solid Door ...

www.restaurantsupply.com > everest-refrigeration-esr1-...

The ESR1 is a 29-1/4" wide, one-section stainless steel insulated upright reach-in refrigerator from Everest Refrigeration with 1 full-size self-closing and field ... Door Style: Swing
Number of Shelves: 3US$2,176.00 · ‎In stock

Everest ESR1 29-1/4" Solid Door Upright Reach ... - Amazon.com

www.amazon.com > Everest-ESR1-Refrigerator-29-25...

Buy Everest ESR1 29-1/4" Solid Door Upright Reach-in Refrigerator, 23-Cubic Feet, NSF: Refrigerators - Amazon.com ? FREE DELIVERY possible on eligible ...

Everest Refrigeration ESR1 29" Solid Door Reach-In ...

www.therdstore.com > page > IFSES > PROD > ESR1

Shop commercial refrigeration equipment at Restaurant Depot. Commercial refrigerators, commercial freezers, merchandiser or beverage cooler for your ... US$2,175.72 · ‎In stock

One suggestion is to take the co

I think that code is a mechanical error code. Not sure. Call the mfr and see what they say. You can google the code and model number and perhaps get it there.

you try it again.

First off, when was the unit purchased? If it was bought after July of 2010 it has a 2 year warranty instead of just their normal 1 year. If not and the current warranty is expired then yes you have a problem. The freezer icing up is caused by a failure in the defrost system. This include a defrost thermostat, a heater and either a defrost timer or in some of the newer computerized models and adaptive defrost control board. The only way to test any of the components is to tear the inner back panel off the freezer and start checking the parts with an ohm meter and see what they read. They should all be closed circuits meaning they would read 0 on a standard continuity tester.

Hello - Could it possibly be HI? Typically error code HI indicates that the unit has detected high temperature in freezer. Try setting the unit to a lower setting. Generally the factory setting is 0 for the freezer temperature and 37 for the fresh food temperature.

Hello there,
If your refrigerator is not cooling, but is running perfectly, you will have to test the door switch, defrost thermostat, defrost heater and the defrost timer, when you test them, replace the faulty part and it will work perfectly fine.
If that does not solve the problem, then check the door switch. Make sure you check the refrigerator if it is still having gas in the cylinder. If there is no gas the refrigerator will be working perfectly fine but will never get cool.
Hope this helps. All the best Elect_Comp

replace the failed door seals

the coils that deliver the cold air are building up condensation. anything that gets cold in the outside should be insulated so as to reduce condensation. hope this helps

Code 3 mean that the evaporator sensor is bad.