My RCA RP-3765 clock is not setting itself right

Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/RCA-RP3765-CD-Players-manual/id/286dj183/t/2/

Do you still need one? Mine just died, and I'd be happy to give it to you.

Download the manual free of charge here (you may have to register for free first):

http://www.retrevo.com/support/RCA-RP3765-CD-Players-manual/id/286dj183/t/2/

Parts will likely come from RCA or, if able to obtain a schematic - a local electronics store .

I tried this manual from a different model and it gives all the info needed
http://www.voxxsupport.com/images/manuals/RP5640/media/RP5640_DOC_OM.PDF

http://www.voxxsupport.com/images/manuals/RP5640/media/RP5640_DOC_OM.PDF
these instruction are good for your model too

Here's a link to a site that claims to have the manual.

http://portablemedia.manualsonline.com/ex/thread/view/idThread/1145307

In order to download you need to register. It's free. I haven't used this site but I do download from a few other tech sites that require registration. It's never led to any problems (spam emails, etc.) but you should scan anything you download from any site for viruses just to be safe.

For the snooze, hold down the snooze button (should display the length of time for snoozing) and hit the time/tune buttons up or down to increase or decrease the snooze time.

For the nap time, press nap and the nap indicator should start blinking. Again, hit the time/tune buttons up or down to increase or decrease the name time in 10 minute increments up to 2 hours.

On the top of the clock, hit the set button one will show alarm 1 then alarm 2 then you will see a little clock symbol then hit fwd or rev.

Press the white button on the base of the clock,
Harry

KateSRU
Did you every get a solution. My clock is having the same problem?

dane5